Hi All,Firstly, how would I default NTP to factory settings? To remove any previous NTP servers from the switch with one command instead of removing them manually one by one?Then how do set my NTP server on my Cisco 2960-X?I can set the server, which...

Hi,My Cisco 2960-X switches have multiple versions of STP.I would like to know what the differences are between these, and which ones are compatible with the generic industry standard STP and then the quick version of STP.My network still has a few s...

My uplink port for my switch, which is a part of a port-channel is going up and down. After closer investigation, it seems it might have something todo with this error: %ILPOWER-3-CONTROLLER_PORT_ERThis is causing brief, but disruptive downtime as th...

Hi Guys,I'm working on my switch called LW-MNSV-SW2I have configured my port 1/0/1 to be my management port for SSH remote access.This is on VLAN 1 as VLAN 1 is my management VLAN.This is then patched into my Uplink Switch which is managed by a 3rd p...

Hi All,I have 2 2960-x switches.On both switches:I have a VLAN 50 (Data) configured on all interfaces and set as trunk native VLAN.I also have a voice VLAN 42 configured on all interfaces.I've created a port-channel on sw1 int range gi 1/0/47-48I've ...