Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Everyone, i've an issue with fiber connection let me explain it:-i've a core SW 4507R+E on port G 1/41 it connected with an ethernet cable the connected to fiber converter okay.and the other side from the fiber cable connected to a fiber conver...
Hello Everyone, lets talk about the issue directly, i've 2 Cisco SWsfirst one is:-SG300-28PP 28-Port Gigabit PoE+ Managed SwitchAAA applied with Microsoft NPS server to be authenticated by ActiveDirectory users/groups and it worked properly with no i...
Hello Team, I need your assistance, I've trying to configure radius authentication with Cisco switch to be authenticated from the NPS server, as shown below I've created 2 network policies on the NPS radius server first policy for TLs with shel...
Hello Team, im working on a task to enable the aaa new-mode on our cisco switchs my question is what is the difference between the below commands?#aaa authentication login default group rad-groups local #aaa authentication login default local group r...
Hello Everyone,im currently facing the weird issue, which is that I've cisco switches 200G and 300 G, and im working on configuring the AAA with radius server "NPS" to authenticate the login from the AD okay,I've configured the AAA radius configurati...
i've replaced the cisco SG 200 with laptop and its the same only works without packet loss when i set port speed 100 for any other options it keeps giving a lot of requests timesout
1- Media Converter is "10/100/1000Base-TX to 1000Base-FX Gigabit Ethernet Converter AN-UMG-MM-AS-850"2- do you have model which says support 1GB (most of local made are different) ?? --> i think that media converter supports 1G3- when use it as speed...
Thank you for the reply but the other policy is the same as the provided one except for shell:priv-lvl=7. however i've tried the guide u mentioned but unfortunately it still gives me the same privilege 15 however im setting it to priv=7 any help ple...
