The better way is to use tftpdnld. It requires that you have a tftp server with the IOS on it. You can get a free server from Kiwi or SolarWinds. Next, plug the switch into the network using any ethernet port. Turn on the switch and get to the ROMMO...
Do NOT use the xmodem method unless you have several hours to waste.Connect your TFTP server to the switch and assign it a static IP address. Then at the ROMMON prompt (for example):> IP_ADDRESS=192.168.19.2 IP_SUBNET_MASK=255.255.255.0 DE...
It should allow an /average/ of 45kbps. If your traffic is bursty you are going to see drops even though the 30 second offered rate is low.If you are putting Voice into your LLQ make sure you are provisioning for the layer 3 header as well as the tra...
Is this the configuration for the router you are trying to reach?It looks as though your access list 23 is blocking the ssh traffic. Is 192.168.0.0/29 the IP space of where you are trying to connect from?Can you telnet to make sure you are not having...
