Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
There is a fairly major bug in AnyConnect 4.7.00136 regarding the tunnel MTU. If DTLS is enabled, it will send packets that are too big and many applications break. Ignoring the df-bit and/or specifying a low MTU doesn't workaround the issue. Disabl...
The WMI's don't seem to be functioning properly for my system. When I go into the Messages Section for each user the Web Interface tells me that their Indicator Light is ON ... and the Telephone has the light on .... but in actuality there are no new...
That sounds correct. UNI ports don't support CDP. It's documented here: http://www.cisco.com/en/US/docs/switches/metro/me3400/software/release/12.2_50_se/configuration/guide/swcdp.html"On the Cisco ME switch, CDP is enabled by default on network no...
It happens on reboot because the interfaces come up in a different order. You can put this in your config to keep them persistent.snmp-server ifindex persistJames
It's even easier. No crossover cable needed. The 3750 can figure it out for itself (as long as you're set to auto/auto):3750(config-if)#mdix ? auto Enable automatic MDI crossover detection on this interface
