Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I've got three APs of differing models running off a 2006 in my home. I've run these APs in autonmous mode and on various versions of LWAPP code.I have multiple client devices that the 2006 WLC is now saying are exhibiting high rates of decrypt erro...
I want to issue "debug ap command 'show ?' ap-name" on a wlc running 4.2. WLC keeps interpreting the "?" locally...is there any way to escape this out?
Hi, I have two 1410 bridges installed 3 kilometers apart, using integrated antennae. I have measured the throughput across the link using two PCs running Qcheck that are directely connected to the bridges, and am only seeing ~15 mbps towards the roo...
Hello,I've a customer that needs to upgrade their existing ACS to 3.2. This is a high-volume production environment, providing TACACS+, LEAP & MAC address authentication for WLAN, and dial-up VPN authentication with a redundant offsite ACS pulling i...
Someone sent me this whitepaper on SSID hiding (and why he thinks it's bad). I've not experienced any of the issues described in the paper. I always considered SSID-hiding to be just a first, minor step to locking down a WLAN, but I'd be interested i...
Get somebody out there with a wireless packet sniffer and a spectrum analyzer... you'll know in 10 minutes what's going on... smells like interference or a bad AP to me.
fella5, i heard exactly the opposite from Cisco. My takeaway from one of the 11n technical training sessions was that the traditional rules of AP placement were turned upside down...11n NEEDS multipath for optimal performance...we were told the more...
the answer to your last question is "somewhat, sure." not sure if this is the issue your having with our client, but in the future you should really, really survey with the AP (and analogous client, if possible) that is intended to be deployed...but...
been a while since I used an autonomous AP for local EAP authentication...but I don't remember it accepting PEAP auths...M$ WZC won't do LEAP or EAP-FAST, right? Think you may have an EAP-type mismatch...
