Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About Frank Osberg
09-03-2019
Frank Osberg
Enthusiast
For the last 10 years, I have been working with network.
I been specialisering working with:
- Cisco routers, switches, which including:
Catalyst 4500, 6500, 7600,
Nexus 5500, 5624, 7000
ARS9000
- Fiber CPE.
- VoIP
- ACS systems
- IPTV setup, including middelware, STB.
- L2 and L3 configuration, MPLS, BGP
Starting to look into ACI - SDN which will be "new" next thing.
For the last 10 years, I have been working with network.
I been specialisering working with:
- Cisco routers, switches, which including:
Catalyst 4500, 6500, 7600,
Nexus 5500, 5624, 7000
ARS9000
- Fiber CPE.
- VoIP
- ACS systems
- IPTV setup, including middelware, STB.
- L2 and L3 configuration, MPLS, BGP
Starting to look into ACI - SD
Recent Badges
Stats
Member since
06-15-2009
33
Posts
20
Helpful
1
Solution
Created by
Frank Osberg
in VPN and AnyConnect
in VPN and AnyConnect
08-29-2019
04:50 AM
08-29-2019
04:50 AM
Nobody that have ideas on this matter??
... View more
Created by
Frank Osberg
in VPN and AnyConnect
in VPN and AnyConnect
08-21-2019
04:20 AM
08-21-2019
04:20 AM
Hi guys, I am having a strange issue....I really hope that you can help me with... We have a site-to-site tunnel with out BGP running up against Azure.... It works no issue here, but after 10-11 days the connections drops... I can see that the tunnel are trying to be established when the tunnel goes down, IKEv2 is there but IPSEC dont come up, and therefor traffic will not go through. This is what I can see in the log: 7|Aug 09 2019|22:27:23|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 6|Aug 09 2019|22:27:21|602303|||||IPSEC: An inbound LAN-to-LAN SA (SPI= 0x59025CE7) between XXXXXXX and XXXXXXX (user= XXXXXXX) has been created. 6|Aug 09 2019|22:27:21|602303|||||IPSEC: An outbound LAN-to-LAN SA (SPI= 0x5825BDF6) between XXXXXXX and XXXXXXX (user= XXXXXXX) has been created. 6|Aug 09 2019|22:27:21|113009|||||AAA retrieved default group policy (GroupPolicy_Azure) for user = XXXXXXX 5|Aug 09 2019|22:27:21|750006|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 SA UP. Reason: New Connection Established 7|Aug 09 2019|22:27:21|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 7|Aug 09 2019|22:27:21|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 7|Aug 09 2019|22:27:21|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 5|Aug 09 2019|22:27:21|750001|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received request to establish an IPsec tunnel; local traffic selector = Address Range: 10.6.164.206-10.6.164.206 Protocol: 0 Port Range: 0-65535; remote traffic selector = Address Range: 172.16.0.1-172.16.0.1 Protocol: 0 Port Range: 0-65535 4|Aug 09 2019|22:27:11|113019|||||Group = XXXXXXX, Username = XXXXXXX, IP = XXXXXXX, Session disconnected. Session Type: LAN-to-LAN, Duration: 0h:00m:07s, Bytes xmt: 0, Bytes rcv: 0, Reason: Administrator Reset 5|Aug 09 2019|22:27:09|750001|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received request to establish an IPsec tunnel; local traffic selector = Address Range: 10.6.164.206-10.6.164.206 Protocol: 0 Port Range: 0-65535; remote traffic selector = Address Range: 172.16.0.1-172.16.0.1 Protocol: 0 Port Range: 0-65535 6|Aug 09 2019|22:27:04|113009|||||AAA retrieved default group policy (GroupPolicy_Azure) for user = XXXXXXX 7|Aug 09 2019|22:27:04|609001|XXXXXXX||||Built local-host outside:XXXXXXX 5|Aug 09 2019|22:27:04|750006|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 SA UP. Reason: New Connection Established 7|Aug 09 2019|22:27:04|609002|XXXXXXX||||Teardown local-host outside:XXXXXXX duration 0:00:20 4|Aug 09 2019|22:27:04|113019|||||Group = XXXXXXX, Username = XXXXXXX, IP = XXXXXXX, Session disconnected. Session Type: LAN-to-LAN, Duration: 0h:00m:20s, Bytes xmt: 0, Bytes rcv: 0, Reason: Peer Reconnected 4|Aug 09 2019|22:27:04|750014|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 Session Aborted. Reason: Initial contact received for Local ID: XXXXXXX, Remote ID: XXXXXXX from remote peer: XXXXXXX:500 to XXXXXXX:500 3|Aug 09 2019|22:27:04|751022|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 Tunnel rejected: Crypto Map Policy not found for remote traffic selector 0.0.0.0/255.255.255.255/0/65535/0 local traffic selector 0.0.0.0/255.255.255.255/0/65535/0! 7|Aug 09 2019|22:27:04|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 5|Aug 09 2019|22:27:04|750002|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received a IKE_INIT_SA request 7|Aug 09 2019|22:27:04|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 5|Aug 09 2019|22:26:56|750001|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received request to establish an IPsec tunnel; local traffic selector = Address Range: 10.6.164.206-10.6.164.206 Protocol: 0 Port Range: 0-65535; remote traffic selector = Address Range: 172.16.0.1-172.16.0.1 Protocol: 0 Port Range: 0-65535 6|Aug 09 2019|22:26:44|113009|||||AAA retrieved default group policy (GroupPolicy_Azure) for user = XXXXXXX 7|Aug 09 2019|22:26:44|609001|XXXXXXX||||Built local-host outside:XXXXXXX 5|Aug 09 2019|22:26:44|750006|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 SA UP. Reason: New Connection Established 7|Aug 09 2019|22:26:44|609002|XXXXXXX||||Teardown local-host outside:XXXXXXX duration 0:00:20 4|Aug 09 2019|22:26:44|113019|||||Group = XXXXXXX, Username = XXXXXXX, IP = XXXXXXX, Session disconnected. Session Type: LAN-to-LAN, Duration: 0h:00m:20s, Bytes xmt: 0, Bytes rcv: 0, Reason: Peer Reconnected 4|Aug 09 2019|22:26:44|750014|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 Session Aborted. Reason: Initial contact received for Local ID: XXXXXXX, Remote ID: XXXXXXX from remote peer: XXXXXXX:500 to XXXXXXX:500 3|Aug 09 2019|22:26:44|751022|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 Tunnel rejected: Crypto Map Policy not found for remote traffic selector 0.0.0.0/255.255.255.255/0/65535/0 local traffic selector 0.0.0.0/255.255.255.255/0/65535/0! 7|Aug 09 2019|22:26:44|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 5|Aug 09 2019|22:26:44|750002|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received a IKE_INIT_SA request 7|Aug 09 2019|22:26:44|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 5|Aug 09 2019|22:26:43|750001|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received request to establish an IPsec tunnel; local traffic selector = Address Range: 10.5.0.148-10.5.0.148 Protocol: 0 Port Range: 0-65535; remote traffic selector = Address Range: 172.16.0.4-172.16.0.4 Protocol: 0 Port Range: 0-65535 5|Aug 09 2019|22:26:32|750001|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received request to establish an IPsec tunnel; local traffic selector = Address Range: 10.6.164.206-10.6.164.206 Protocol: 0 Port Range: 0-65535; remote traffic selector = Address Range: 172.16.0.1-172.16.0.1 Protocol: 0 Port Range: 0-65535 6|Aug 09 2019|22:26:24|113009|||||AAA retrieved default group policy (GroupPolicy_Azure) for user = XXXXXXX 7|Aug 09 2019|22:26:24|609001|XXXXXXX||||Built local-host outside:XXXXXXX 5|Aug 09 2019|22:26:24|750006|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 SA UP. Reason: New Connection Established 7|Aug 09 2019|22:26:24|609002|XXXXXXX||||Teardown local-host outside:XXXXXXX duration 0:00:20 4|Aug 09 2019|22:26:24|113019|||||Group = XXXXXXX, Username = XXXXXXX, IP = XXXXXXX, Session disconnected. Session Type: LAN-to-LAN, Duration: 0h:00m:20s, Bytes xmt: 0, Bytes rcv: 0, Reason: Peer Reconnected 4|Aug 09 2019|22:26:24|750014|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 Session Aborted. Reason: Initial contact received for Local ID: XXXXXXX, Remote ID: XXXXXXX from remote peer: XXXXXXX:500 to XXXXXXX:500 3|Aug 09 2019|22:26:24|751022|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 Tunnel rejected: Crypto Map Policy not found for remote traffic selector 0.0.0.0/255.255.255.255/0/65535/0 local traffic selector 0.0.0.0/255.255.255.255/0/65535/0! 7|Aug 09 2019|22:26:24|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 5|Aug 09 2019|22:26:24|750002|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received a IKE_INIT_SA request 7|Aug 09 2019|22:26:24|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 5|Aug 09 2019|22:26:20|750001|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received request to establish an IPsec tunnel; local traffic selector = Address Range: 10.6.164.206-10.6.164.206 Protocol: 0 Port Range: 0-65535; remote traffic selector = Address Range: 172.16.0.1-172.16.0.1 Protocol: 0 Port Range: 0-65535 5|Aug 09 2019|22:26:08|750001|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received request to establish an IPsec tunnel; local traffic selector = Address Range: 10.6.164.206-10.6.164.206 Protocol: 0 Port Range: 0-65535; remote traffic selector = Address Range: 172.16.0.1-172.16.0.1 Protocol: 0 Port Range: 0-65535 6|Aug 09 2019|22:26:04|113009|||||AAA retrieved default group policy (GroupPolicy_Azure) for user = XXXXXXX 7|Aug 09 2019|22:26:04|609001|XXXXXXX||||Built local-host outside:XXXXXXX 5|Aug 09 2019|22:26:04|750006|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 SA UP. Reason: New Connection Established 7|Aug 09 2019|22:26:04|609002|XXXXXXX||||Teardown local-host outside:XXXXXXX duration 0:00:20 4|Aug 09 2019|22:26:04|113019|||||Group = XXXXXXX, Username = XXXXXXX, IP = XXXXXXX, Session disconnected. Session Type: LAN-to-LAN, Duration: 0h:00m:20s, Bytes xmt: 0, Bytes rcv: 0, Reason: Peer Reconnected 4|Aug 09 2019|22:26:04|750014|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 Session Aborted. Reason: Initial contact received for Local ID: XXXXXXX, Remote ID: XXXXXXX from remote peer: XXXXXXX:500 to XXXXXXX:500 3|Aug 09 2019|22:26:04|751022|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 Tunnel rejected: Crypto Map Policy not found for remote traffic selector 0.0.0.0/255.255.255.255/0/65535/0 local traffic selector 0.0.0.0/255.255.255.255/0/65535/0! 7|Aug 09 2019|22:26:04|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 5|Aug 09 2019|22:26:04|750002|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received a IKE_INIT_SA request 7|Aug 09 2019|22:26:04|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 5|Aug 09 2019|22:25:56|750001|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received request to establish an IPsec tunnel; local traffic selector = Address Range: 10.6.164.206-10.6.164.206 Protocol: 0 Port Range: 0-65535; remote traffic selector = Address Range: 172.16.0.1-172.16.0.1 Protocol: 0 Port Range: 0-65535 5|Aug 09 2019|22:25:44|750001|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received request to establish an IPsec tunnel; local traffic selector = Address Range: 10.6.164.206-10.6.164.206 Protocol: 0 Port Range: 0-65535; remote traffic selector = Address Range: 172.16.0.1-172.16.0.1 Protocol: 0 Port Range: 0-65535 6|Aug 09 2019|22:25:44|113009|||||AAA retrieved default group policy (GroupPolicy_Azure) for user = XXXXXXX 7|Aug 09 2019|22:25:44|609001|XXXXXXX||||Built local-host outside:XXXXXXX 5|Aug 09 2019|22:25:44|750006|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 SA UP. Reason: New Connection Established 7|Aug 09 2019|22:25:44|609002|XXXXXXX||||Teardown local-host outside:XXXXXXX duration 0:00:18 4|Aug 09 2019|22:25:44|113019|||||Group = XXXXXXX, Username = XXXXXXX, IP = XXXXXXX, Session disconnected. Session Type: LAN-to-LAN, Duration: 0h:00m:19s, Bytes xmt: 0, Bytes rcv: 0, Reason: Peer Reconnected 4|Aug 09 2019|22:25:44|750014|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 Session Aborted. Reason: Initial contact received for Local ID: XXXXXXX, Remote ID: XXXXXXX from remote peer: XXXXXXX:500 to XXXXXXX:500 3|Aug 09 2019|22:25:44|751022|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:XXXXXXX IKEv2 Tunnel rejected: Crypto Map Policy not found for remote traffic selector 0.0.0.0/255.255.255.255/0/65535/0 local traffic selector 0.0.0.0/255.255.255.255/0/65535/0! 7|Aug 09 2019|22:25:44|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 5|Aug 09 2019|22:25:44|750002|||||Local:XXXXXXX:500 Remote:XXXXXXX:500 Username:Unknown IKEv2 Received a IKE_INIT_SA request 7|Aug 09 2019|22:25:44|713906|||||IKE Receiver: Packet received on XXXXXXX:500 from XXXXXXX:500 When login to my ASA through ASDM I log the connection out, then the connecting are been reestablished, and are working again. I have used the configuration from the Azure (or have taking the function out that we needed) What can I do here?? And what else do you need of info. :) Frank
... View more
Labels:
08-13-2019
06:02 AM
Alright have now been testing it and 16.9.3 also solves the issue here. In test running for nearly 3 weeks. Production 1½ weeks now. :)
... View more
08-04-2019
11:53 PM
Great to hear that you are not seeing any issue here on 1.6.6.x version, is anybody running 16.9.x version and can confirm that this is not a issue here :)
... View more
07-30-2019
04:46 AM
Hi guys, Does anybody knows if this is fixed?? I am running 16.6.1 upgrading to 16.9.2 and now 16.9.3 on my 450 x C9300 switches. :) And from time to time we are facing this issue, but not very often :) Keep me posted please :)
... View more
05-27-2019
05:38 AM
so if you are making this filter in the CLI, will you be able to see it in the gui afterwords or not?? I have made the filter in the cli, but mails coming with a blank sender is still coming through.... This is my CLI: []> list Num Active Valid Name 1 Y Y block_null_from_headers 2 Y Y block_null_bounce_headers and my message tracking is telling me this Envelope Sender: (no sender) 27 May 2019 14:24:57 (GMT +02:00) Message 23981422 Sender Domain: 27 May 2019 14:24:57 (GMT +02:00) Start message 23981422 on incoming connection (ICID 56088196). 27 May 2019 14:24:57 (GMT +02:00) Message 23981422 enqueued on incoming connection (ICID 56088196) from . 27 May 2019 14:24:57 (GMT +02:00) Message 23981422 direction: incoming I would like to block this type of mails ASAP.
... View more
04-25-2019
07:04 AM
Hi guys, OK I really hope some one can help me out here. :) I am running multiple sites on ASA5505 and ASA5506, they are all running EASY-VPN since we only have 1 vlan pr. so that is OK. But we now need to be able to do PXE boot, on the sites. Ok that sounds fine, since we are doing all DHCP option from our central DHCP server, meaning we are running dhcp-relay on the ASA. I am stuck now, since I cannot get it to work, all dhcp option for dhcp etc are running, but my pc cannot do a PXE boot. I can see on my switch that the client are getting a ip, and the client is starting the pxe function, but not working. I can see that the ASA is not able to do option 67 etc for the PXE boot for some strange reason. :) So what can I do here??? Frank
... View more
Labels:
Re: Interference threshold violation re...
in Other Wireless - Mobility Subjects
12-18-2018
12:50 AM
12-18-2018
12:50 AM
I am seeing the same issue in my prime with my 2802i models, they are also running in AP Groups, so how did you solved this??? Frank
... View more
Created by
Frank Osberg
in Cisco Bug Discussions
in Cisco Bug Discussions
08-20-2018
04:03 AM
08-20-2018
04:03 AM
Hi all,
I found this CSCvh70217 since my dnac is doing this error, and I changed the give value as in the csc, rebooted my dnac, but I am still getting the same error.
also when I then try to go into Tools - Monitoring I am getting this error
And my Log Explore also fails - I am getting a
Kong Error
An unexpected error occurred.
I am running 1.1.8
Others there is having this issue, and how to fix this? :)
Frank
... View more
Labels:
Created by
Frank Osberg
in Switching
in Switching
08-13-2018
05:24 AM
08-13-2018
05:24 AM
Hi all,
OK I am facing a bit of a wired issue. :) We have started to use the new C9300 switches, but I am having a hard time getting my QoS for my Voice etc to work correctly.
I have this policy map, and class-map on my switch.
class-map match-all IN-VOICE-SIG match ip dscp cs3
class-map match-all IN-MULTIMEDIA-CONFERENCING match ip dscp cs4 af41
class-map match-all OUT-CITRIX-OUT-VOICE-SIG match ip dscp af31 class-map match-all OUT-VOICE match ip dscp ef class-map match-all IN-CITRIX match access-group name IN-CITRIX class-map match-all IN-VOICE match ip dscp ef !
policy-map OUT-QUEUEING class OUT-VOICE priority level 1 percent 20 queue-buffers ratio 5 class OUT-MULTIMEDIA-CONFERENCING bandwidth remaining percent 40 queue-buffers ratio 10 class OUT-CITRIX-OUT-VOICE-SIG bandwidth remaining percent 40 queue-buffers ratio 10 class class-default bandwidth remaining percent 20 queue-buffers ratio 40
!
policy-map IN-MARKING class IN-VOICE set dscp ef class IN-MULTIMEDIA-CONFERENCING set dscp af41 class IN-CITRIX set dscp af31 class IN-VOICE-SIG set dscp af31 class class-default set dscp default
On my office port where my laptops and cisco phones are connected I got the following config:
interface GigabitEthernet1/0/16 description OFFICE switchport mode access switchport voice vlan 10 switchport port-security maximum 2 switchport port-security violation restrict switchport port-security aging time 2 switchport port-security aging type inactivity switchport port-security spanning-tree portfast spanning-tree bpduguard enable service-policy input IN-MARKING
and on my WAN port I got this config:
interface GigabitEthernet1/0/24 description WAN PRIMARY switchport mode trunk logging event link-status logging event trunk-status logging event bundle-status spanning-tree portfast trunk spanning-tree bpdufilter enable service-policy output OUT-QUEUEING ip dhcp snooping trust
So I can when I do a show policy-map interface g1/0/16 that we are getting hits on the given rules here, but on my WAN port the traffic is not been marked correctly since I dont have any this on the given rules.
Interface g1/0/16 - show policy-map
GigabitEthernet1/0/16 Service-policy input: IN-MARKING Class-map: IN-VOICE (match-all) 1022226 packets Match: ip dscp ef (46) QoS Set dscp ef Class-map: IN-MULTIMEDIA-CONFERENCING (match-all) 0 packets Match: ip dscp cs4 (32) af41 (34) QoS Set dscp af41 Class-map: IN-CITRIX (match-all) 5977066 packets Match: access-group name IN-CITRIX QoS Set dscp af31 Class-map: IN-VOICE-SIG (match-all) 385210 packets Match: ip dscp cs3 (24) QoS Set dscp af31 Class-map: class-default (match-any) 143604 packets Match: any QoS Set dscp default
So all is OK here, traffic are marked correctly.
But on my WAN Port where I have my given service-policy I don´t see any traffic for EF class
GigabitEthernet1/0/24 Service-policy output: OUT-QUEUEING queue stats for all priority classes: Queueing priority level 1 (total drops) 0 (bytes output) 3407745377 Class-map: OUT-VOICE (match-all) 0 packets Match: ip dscp ef (46) Priority: 20% (20000 kbps), burst bytes 500000, Priority Level: 1 queue-buffers ratio 5 Class-map: OUT-MULTIMEDIA-CONFERENCING (match-all) 0 packets Match: ip dscp af41 (34) Queueing (total drops) 0 (bytes output) 0 bandwidth remaining 40% queue-buffers ratio 10 Class-map: OUT-CITRIX-OUT-VOICE-SIG (match-all) 0 packets Match: ip dscp af31 (26) Queueing (total drops) 0 (bytes output) 3115140171 bandwidth remaining 40% queue-buffers ratio 10 Class-map: class-default (match-any) 0 packets Match: any Queueing (total drops) 0 (bytes output) 5065289206 bandwidth remaining 20% queue-buffers ratio 40
So what have I done wrong here??
I am running version 16.6.1 version on my switch.
Hope somebody can help me out here. :)
Frank
... View more
Created by
Frank Osberg
in Automation and Analytics
in Automation and Analytics
07-04-2018
03:09 AM
07-04-2018
03:09 AM
Ahh that did it... small thing to fix the issue.... Adam thanks for all your support here.
... View more
Created by
Frank Osberg
in Automation and Analytics
in Automation and Analytics
06-26-2018
11:40 PM
06-26-2018
11:40 PM
can you give more info here on what you mean for this matter?? So a command end without actoin 3.0 cli command or??
... View more
Created by
Frank Osberg
in Automation and Analytics
in Automation and Analytics
06-26-2018
06:13 AM
06-26-2018
06:13 AM
Ahh I can see that the problem is not solved yet. It´s not using my EEM script, my log tells me this Jun 26 2018 13:06:15: %DHCP_SNOOPING-4-NTP_NOT_RUNNING: NTP is not running; reloaded binding lease expiration times are incorrect. Jun 26 2018 13:06:22: %AAAA-4-NOSERVER: Warning: Server piseadms001.solar.eu is not defined. Jun 26 2018 13:06:22: %AAAA-4-NOSERVER: Warning: Server piseadms002.solar.eu is not defined. Jun 26 2018 15:06:27: %PARSER-4-BADCFG: Unexpected end of configuration file. Jun 26 2018 15:08:14: %DHCP_SNOOPING-4-DHCP_SNOOPING_DATABASE_FLASH_WARNING: Saving DHCP snooping bindings to flash can fill up your device causing the writes of bindings to device, to fail. Jun 26 2018 15:08:19: %PARSER-4-BADCFG: Unexpected end of configuration file. My EEM Script is: ! ! EEM SCRIPT ! event manager session cli username XXXX privilege 15 event manager applet POST_PNP event timer countdown time 180 action 1.0 cli command "enable" action 1.1 cli command "config t" action 2.0 cli command "aaa authorization config-commands" action 2.1 cli command "aaa authorization commands 1 default group TACACS-ISE if-authenticated" action 2.2 cli command "aaa authorization commands 15 default group TACACS-ISE if-authenticated" action 2.3 cli command "no event manager applet POST_PNP" action 2.4 cli command "end" action 2.5 cli command "wr mem" action 3.0 cli command "end" ! those two commands are not been put into the configuration.
... View more
Created by
Frank Osberg
in Automation and Analytics
in Automation and Analytics
06-26-2018
12:20 AM
06-26-2018
12:20 AM
Hehe Point to my self, that I just need to past my configuration in here first. would save of some time on this matter
... View more
Created by
Frank Osberg
in Automation and Analytics
in Automation and Analytics
06-25-2018
11:46 PM
06-25-2018
11:46 PM
Ahh that fixed the issue here. Thanks for your help araford.
... View more
08-21-2019
Hi guys, I am having a strange issue....I really hope that you can help
me with... We have a site-to...
08-13-2019
Alright have now been testing it and 16.9.3 also solves the issue here.
In test running for nearly 3...
08-04-2019
Great to hear that you are not seeing any issue here on 1.6.6.x version,
is anybody running 16.9.x v...
07-30-2019
Hi guys, Does anybody knows if this is fixed?? I am running 16.6.1
upgrading to 16.9.2 and now 16.9....
05-27-2019
so if you are making this filter in the CLI, will you be able to see it
in the gui afterwords or not...
04-25-2019
Hi guys, OK I really hope some one can help me out here. :) I am running
multiple sites on ASA5505 a...
Created by
Frank Osberg
in Cisco Digital Network Architecture (DNA)
03-08-2019
03-08-2019
Year I have checked that it containts all ipes etc. so it´s a bit
strange. :)
Created by
Frank Osberg
in Cisco Digital Network Architecture (DNA)
03-06-2019
03-06-2019
Hi all, Ok so on my dna-c I have had running for over a year now. We
just migrated from only running...
12-18-2018
I am seeing the same issue in my prime with my 2802i models, they are
also running in AP Groups, so ...
08-20-2018
Hi all, I found this CSCvh70217 since my dnac is doing this error, and I
changed the give value as i...
08-13-2018
Hi all, OK I am facing a bit of a wired issue. :) We have started to use
the new C9300 switches, but...
Created by
Frank Osberg
in Automation and Analytics
07-04-2018
07-04-2018
Ahh that did it... small thing to fix the issue.... Adam thanks for all
your support here.
Created by
Frank Osberg
in Automation and Analytics
06-26-2018
06-26-2018
can you give more info here on what you mean for this matter??So a
command end without actoin 3.0 cl...
Created by
Frank Osberg
in Automation and Analytics
06-26-2018
06-26-2018
Ahh I can see that the problem is not solved yet.It´s not using my EEM
script, my log tells me thisJ...
Public Statistics
| Date Registered | 06-15-2009 01:59 AM |
| Date Last Visited | 09-03-2019 01:09 AM |
| Total Messages Posted | 33 |
| Total Helpful Votes Received | 20 |
