About robert.vizitiu1

robert.vizitiu1 · 11-25-2015

Hello all, I have some questions regarding the followin design maybe you guys can help me. We have 4 cisco 2960 switches, 2 Nexus 5500 , 2 ASA 5545 and a router used for BGP.We would like to use vPC on the Nexus switches as in the image: ----------C...

robert.vizitiu1 · 01-26-2016

Hello Jessica, Maybe an output of the "show int stats" can help you check how many packets are routed using processor. A high number of packets through processor can indicate high cpu. Robert

robert.vizitiu1 · 12-09-2015

Hello Ganesh, We did some research and agreed with my colleagues to use Routed mode so we will do it that way.Thank you very much for your time and I will let you know how it worked :)

robert.vizitiu1 · 12-06-2015

Hello Ganesh, Thanks a lot for your input, this was very helpful. So basically this setup will work only if I use ASA in routed mode, is there any way to make it in transparent mode? Thank you, Robert

robert.vizitiu1 · 12-04-2015

Hi Ganesh, Thank you for this document , is very useful. My topology would look like the one at page 5 for transprent mode but I want to alter this topology so I would have : L3 Cloud (router) ===> Cluster ASA ====>Nexus On the ASA cluster I will co...

robert.vizitiu1 · 10-12-2015

Hi, The message means the 2 policies for negotiating IKE Phase 1 doesn't match.You should configure on R2 also the following policy: crypto isakmp policy 2encr aes 256authentication pre-sharegroup 2

Member Since	‎09-23-2015 02:14 AM
Date Last Visited	‎08-17-2018 12:04 AM
Posts	8

User Statistics

User Activity

vPC between Nexus and Cisco ASA 5545-x

Hello Jessica,

Hello Ganesh,

Hello Ganesh,

Hi Ganesh,

Hi, The message means the 2