Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Our current Guest SSID is wide open. We plan to implement both a PSK and a Splash Page for our AUP in the next month, and testing this, I noticed I had to "forget network" on my device and reconnect as if it was the first time again. I guess one way ...
I used CSP v2.8 back about 2-3 years ago. I'm starting from scratch again with CSP 2.9.1. When I log-in to my SNTC Portal I still see the old 2.8 collector and it won't delete, and neither will the new, but my big problem is that even after deleting ...
Have an issue with MX67s rebooting like clock work every couple of hours, causing 10-12 minutes of downtime.Site 1 - Multiple factory resets, upgrades/downgrades, even did a RMA and still had the same issue. Was told to bring it home and wire it up t...
Trying to figure out why some devices are labeled "unreachable" when I have no issue connecting to them via SSH or SSL from the same machine I'm running CAA on. From the error logs it appears CAA tries HTTP, HTTPS, Telnet and SSH, but confused as to ...
Currently we are experiencing latency issues with Sprint's MPLS network. When these spikes happen (3 in the last 3 months) it becomes service affecting for us and with a backup network in place, traffic will only fail over if the MPLS circuit goes do...
my CCOID is frankroche. i have 2 collectors both of which i can't delete although i'm just looking to delete the old one. i have deleted my inventory several times and did a new collector job on the new csp, but everytime i come back into SNTC i see ...
When this happened the first time Meraki Support said it looked like the firmware upgrade was not completing and therefore was attempting to redownload and install every couple of hours. Now I already dealt with Palo Alto and confirmed the firewall w...
Just double checking my switch logs and there are link changes. Here is the most recent what I can only assume is a reboot. Dashboard shows offline from 6:42a-6:57aApr 2 06:44:36.429 est: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEtherne...
All versions to the current v13 to beta v14 and 15. Not a firmware problem, happens with all versions. Also it's worth mentioning that we didn't change one piece of any configuration after we brought it back from home.
