Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,we are planning an IOS upgrade for a Cisco Catalyst 6509 Switch with two redundant supervisors with reference: WS-X6K-SUP2-2GE.we have installed the c6sup22-js-mz.121-27b.E.bin IOS Image (12.1(27b)E, RELEASE SOFTWARE (fc2))The Switch Has ...
Hi Everyone:We have a Cisco 1841 Router acting as a group member in a GETVPN network. when this router reloads, ISAKMP Process always stays OFF (%CRYPTO-6-ISAKMP_ON_OFF: ISAKMP is OFF) and only start this process until we forced it through a clear c...
Hi to all,i have an odd problem with Cisco MIB for IPSEC:We have a GETVPN network established for one client. Everything related to encryption works fine between group members (IKE phase 1 and 2). Our client request us to monitor all active VPN tunne...
well, hjust to close this post:Our SUp2 has 128MB on SP DRAM and our MSFC has 512MB. So, we can't upgrade IOS Image from 12.1 to 12.2Thanks to Reza and all of you.Regards,Damián
Hi Reza,Thank you very much for your help.I have a final question about my future upgrade to IOS 12.2SX and is related to your answer:Cisco IOS 12.2SX requires the following hardware requirements in DRAM capacity to operate:- Switch processor = 256 M...
Hi Joe:Finally i performed the test you recommended on one router with IPSEC SNMP issues, First i enabled debug crypto mib error and debug crypto mib detail commands and verified the results after disabling crypto map on the interface. The logs show...
