Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI have the message "File system is in an inconsistent state" when I try to save the configuration in a 6500 IOS MSFC2 Software (C6MSFC2-PO3SV-M), Version 12.1(11b)E,and I don`t know how to solve this problem. In the bootflash i get this list:1 ....
HiI read that when you make multi vlans Cisco recommend connect the switch to routers or servers only.So, if you have a 6500 with a router processor, it is possible to connect a multi vlan to a port in the 6500. I have this question because this is m...
Hi all,I'm have some problems with intervlan routing between a 6506 and several 3550 switches. I make trunk (isl) on both sides, the trunk seems to work well, but I cant ping anywhere.Here is a part of the configuration.3550 - 48smi!text deletedinter...
You must have trunk on isl on both sides, 2924 sideint g x/x switchport trunk encap isl switchport mode trunkon the other side the same.Don´t put on auto the trunk negotiation.Hope this helpPablo
Thanks for your comments,Well I have the conditioning cable on both sides, my distance is 900 m and I have link, however there is no trunk.If I have link, the trunk should be able?Pablo
Ok, I have a routed network and I want to put my new equipment working in it.In the new equipment there is a 6506 catalyst and several 3550(48) switches.The idea is to have vlans in the 6506 and make to work with the current routed network. I define ...
