Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, sorry for this subject as there are many similar threads but not identical. Having a little trouble getting this to work even after searching all the related threads exhaustively.I have an IOS router for VPN client access. Authentication and gr...
I have a 4404 controller with 1010APs and deciding which EAP method to use. As I was analyzing this and sniffing wireless packets, username is sent in clear over the air when authenticating with PEAP. I was somewhat surprised and thought that was ...
Set is as follows: R1 has dedicated links to R2 and R3. R2 is in VRF net1 adn R3 is in VRF net2. I would like R1 to be a hub for R2 and R3 which are spokes. I would like to do this with EIGRP. I have the following configuration on R1:ip vrf net1...
We're just starting to deploy VPN authentication with certificates as our remote sites are beginning to have dynamic IPs (for $$$ reasons). However, at the central location, we have PIX firewalls in failover. Use pre-shared keys works well in failo...
When I enabled CEF on my router (12.3(4)T3) and performing traceroute across GRE tunnels, it doesn't display the IP address of the GRE tunnel. For example, without CEF enabled doing a traceroute from 172.16.1.3 to 172.18.1.3 will show the following:...
Hi,Thanks for the reply, but it still doesn't work.I have two groups: admin (no restrictions) & vpnusersIn my vpnusers groups, I created an IP based NAR to restrict (r1841 * *) all to my router.SSH/Telnet access is effectively denied for users in the...
However, for precautionary reasons and a better understanding of how secure this is, where and how is the master key stored? I entered the master key for aes encryption, rebooted the router and tried changing the master key. Router correctly knew w...
Controller is set only for WPA2 with AES encryption and 802.1x. I'm using a Cisco Aironet a/b/g PCMCIA card using the Cisco Aironet utility (latest version) as my supplicant (not using windows configuration for wireless networks).James
