Hello,I'm trying to configure on a FPR-2140 appliance (FTD vers. 7.2.2) from FMCv (also running 7.2.2) equipped with a 4x SFP+ 10G NM etherchannels ports (LACP mode active) using using up to 4x 10G Interfaces.This however do not seem to be working.Ge...
Hi, I would like to know if the latest version of Cisco Anyconnect Client (at the time of this writing - 4.10) is capable to use TPN-stored Certificates under a MS Windows 10 (Enterprise) OS. If so, could you please point out to Technical Dokumentati...
Hi,I would like to ask if under ASA OS vers. 9.14(1)15and Anyconnect vers. 4.9.01XXX It is now possible to QoS (Police - meaning Bandwidth rate limit) a single Anyconnect VPN user (regardless if per IPSec or SSL VPN connected) - and if yes, how this ...
Hi,I would like to ask for experts' opinion on how to address the following design scenario: We currently rely on Posture (Anyconnect based) for NAC via ISE for granting endpoint access to our network (per VPN as well as WLC based) based on a given s...
Hi, I would like to know if ISE 2.7 now support integration with MS Azure AD, and to which extent (which options are currently supported and working; which options are still missing ) ? Can you please provide some technical reference / walkthrough to...
Hi - actually managed to solve the issue by myself - here the fix for future reference:the 10G / SFP+ interfaces must be first enabled at fx-os level under the fabric scope; once enabled, it is possible to build / rollout LACP etherchannels from with...
Hi - thanks for the feedback. Concerning your statement: "Azure AD does not support LDAP so ISE only directly integrates with AAD via SAML."I believe this is not 100% correct - I quickly googled the topic and actually both LDAP and LDAPS (on a virtua...
Hi, thanks for the Links. I actually already found them in the ISE forum and went through them. My purpose was to know if there has been in the meantime any progress internally within the ISE Development and Product Team on this topic. Is the info th...
