Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Good Day, We are currently having an issue whereby Transcoders registered to CUCM via SCCP are not being invoked, when we register them to the CUBE then it works. Transcoders are registered to CUCM and are in the correct groups which is assigned to t...
Hi,I have configured a voice translation rule on our gateway so that it sends the translated number to CUCM, however this is not working, I have tested my translation rule and that's working but for some reason its not being applied and sent to CUCM,...
Hi, We need to send out P- asserted id's to our ITSP, we have the below string and the PID is being added, however the ..... is coming up, this is related to our incorrect string, how do we make this dynamic so that it sends out the PID of each exte...
Hi there,
I recently had to restore CUCM 11.5 with onboard PLM, I had a backup of the PLM as well and it restored but the licenses didnt and i had to log a TAC and prove the licenses had to be provided, I just want to know if this is normal that th...
Hi All,
I need some help please, we have a client with a telco PRI, the telco had a failure last week but has since resolved but ever since then when we make an outbound call, the call lasts for about 2-3 seconds and then shuts itself down(inbound ...
Hi Anthony, Please see below ***CUBE TO ITSP***289236: Nov 4 07:31:31.383: //5516466/5A1001000000/SIP/Msg/ccsipDisplayMsg:Sent:INVITE sip:011XXXXXXX@ITSP:5060 SIP/2.0Via: SIP/2.0/UDP CUBE:5060;branch=z9hG4bK1B304A10From: <sip:012XXXXXX@CUBE>;tag=30E8...
Hi Anthony, Thanks for the response, when I say register them to the CUBE, I mean the below configuration invokes the transcoder. dspfarm profile 1 transcodecodec g729abr8codec g729ar8codec g711alawcodec g711ulawcodec g729br8codec g729r8maximum sessi...
Yes this is what a I did, I created a new PT and CSS and then assigned it to a called party transform mask and assigned it to the inbound CSS of the gateway, thanks for the advice. I just thought we could do it on the gateway for a "cleaner config" o...
