Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,We have got an issue with an IPSec tunnel between Cisco PIX515E and Juniper firewall, the last one is managed by ISP. The tunnel is set up over the Internet.There are a number of subnets running via this tunnel. The issue is that sometimes the ...
Hello,I am trying to set up a SIP trunk for a client between a recently provisioned CUCM 7.1.5 server and a VoIP service provider. The software MTP is provisioned and G711alaw codec is set up on both sides. The phone and MTP are also in the same Regi...
Hello everyone,We have PIX 515E with 7.2(4) software on it. I am trying to identify why do we get drops on the outside interface. Here are some statisctics:Interface Ethernet0 "outside", is up, line protocol is up Hardware is i82559, BW 100 Mbps Ful...
Hello,We have a customer with h323 videophones who wish to call one of our extensions directly. So I am trying to find out whether it's possible to call a gatekeeper endpoint from an external h323 video endpoint (not registered to this GK). Or to sim...
I need to configure access restrictions between VLANs in client's network. For some reason the ACLs configuration we have now does not make any difference as all traffic can freely flow between the VLANs. There are three VLANs:2 DATA - 172.29.1.0/2...
Hello,I was wondring if it has become available with any newer firmware. I am trying to connect office network to a cloud provider network via PPTP. Any advice anyone?Thanks.Andri
Hi Filippo, At the moment we are at the stage of completing the migration to SIP plaform. So I won't be able to test your instructions. In any case thank you for your help.
Hi Jing,Thanks for getting back to me. Here are my comments:1. check if you have multiple trunk point to same IP towards service provider. If we do then pls make sure CSS on those trunks can reach your dest.Nope, just one trunk. CSS is correct, as pe...