About tech_king

tech_king · 01-12-2018

Ive attempted to upgrade my 2901 from 15.1(4)M4 to IOS version 15.4.3M8 but when I do so routes from my MPLS PE router do not make it into my routing table They show in my ospf database but for some reason are not populating my routing table. Below ...

tech_king · 08-17-2017

I have a EEM script that reboots a cellular interface after 10 mins of downtime but it runs inside another EEM Script. For some reason when it runs it shows as abort. Can someone help me to fix my script so it can run successfully? below are the scr...

tech_king · 07-19-2017

I just ran a portscan on my asa firewall and noticed that the ports listed below are open on my outside interface. My problem is that I am not using any of these ports and have not firewall rules permitting them. Any ideas on how to close them? 2000...

tech_king · 07-09-2017

Hi,Ive been setting up locations in my topology map and just recently added my WLC and APs. The devices have successfully been added to the device inventory but for some reason when I add them to my Main Office location I am unable to see them in the...

tech_king · 10-24-2016

Hi guys I have configured EEM to track an object based on IP SLA. It basically resets my 4g interface if my SLA goes down. It works perfect but only initiates one time when the triggered condition is met. What I would like to know is if there is any...

tech_king · 03-01-2018

Hi, we would like to request for stencils for the Cisco 819 series routers. Thanks

tech_king · 08-22-2017

Would I need to include the time for the watchdog timer?

tech_king · 07-15-2017

Tried that but still no luck

tech_king · 07-09-2017

Hi the APs that are in Flexconnect mode are currently showing in the topology map in their designated locations. Its the ones that are locally at my HQ that arent showing.Also, the WLC isnt showing in the map either which is bugging me.

tech_king · 07-09-2017

Yes CDP is enabled. The only difference between the AP's that show and the ones that done is that they are using flexconnect. Its rather strange that the WLC doesnt show at all either in the Topology Map but all the devices show in the device invento...

Member Since	‎11-26-2014 06:06 PM
Date Last Visited	‎05-22-2018 10:30 AM
Posts	23
Total Helpful Votes Received	7

User Statistics

User Activity

OSPF external routes showing in database but not in routing table.

EEM Script works perfect but shows as abort in history

Closing Unused ports on my ASA

WLC & APs not showing in Topology Map

Object tracking EEM applet repeat trigger

Re: Updated Visio Stencils

Re: EEM Script works perfect but shows as abort in history

Re: WLC & APs not showing in Topology Map

Re: WLC & APs not showing in Topology Map

Re: WLC & APs not showing in Topology Map