Hello, we are facing a problem in main bandwidth link, bandwidth is terminated on a Cisco 3550 Switch, and then routed to 3660 Router, we have almost try every possible scenario, but facing still problem, e.g, changing fiber cable route, fiber m...
Hello, We are facing a routing problem, that when we trace route to the same Destination, different routes appear every time when we trace the same destination. and also facing Uploading and MSN messanger loging problem, because of this...
AOA, We are using 3550 Switch, and when i try to implement a Specific Service Policy Input on a specific port, it take some time almost 10 Second, Policy is not implemented.This problem errase when we implemente wrr-queue bandwidth 10 20 40 80wrr-...
AOA, I have a L3(3550) and L2(2950) Swithces, Different client are connected with these switches ports (Almost 1000), whats is the best device(Router) which we can use For a ( Nating , Traffic Shaping, Bandwidth Management of the Client, IP basced...
Can i control a Bandwidth of the client with this configuration, if 2950 Switch is connected with Gi0/11 Port. Bandwidth is configured on 3550.3550(config)#mls qos aggregate-policer fncmarketing-FNC001 64000 8000 exceed-action drop3550(config)#class-...
AOA, No i have a Window based system, i remotly access a Linux server through SSH client(Putty). Seesion Hang during SSH connection, and two NIC card are installed on a Window based system through which i try to connect to Linux Server.Thank You.