Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Dears,We are having two 6500 switches connected over one 10G link, and we are going to create an additional 10G link with Etherchannel and an additional four 1G links with Etherchannel to be used as a backup for the 10G Etherchannel.We are trying to ...
Hello All,We are in the process of installing NAS router to terminate PPPoE sessions which will be redirected to RADIUS server for authentication, as i know this process require high CPE utilization, i would apprecaite if you recommend a router with ...
I've downlowded the new IOS relase 12.1(22)EA5 for Cisco2950 switch in order to support the full range of VLAN IDs as mentioned on Cisco sitehttp://www.cisco.com/en/US/products/sw/iosswrel/ps5013/prod_bulletin0900aecd802efa1c.htmlAfter upgrading the ...
Dears,I just want to know if Cisco ASA 5510 is DMZ supported or not? as i didn't dind this info on the product description, here the part number: ASA5510-SEC-BUN-K9
I have configured 3640 router to perform as PPPoE server in order to terminate the PPPoE sessions and forward it to a RADIUS server, I?ve included the router configuration below but this configuration isn?t working, your help is highly appreciated?vp...
Thanks all for your help, I've configured the AAA model as below and it wroks fine.aaa authentication ppp test group radiusaaa authorization network test group radiusaaa session-id common
