Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiIm running a setup with Prime Infrastructure and Apic-em and Im having a issue when deleting a PnP profile on PI the device is still in pending mode on Apic-em server and im not able to add the device to the PnP profile again.Is there a command to ...
HiAnyone here that got experience with configuring wirless guest authentication with fortiwlc(Meru) and Cisco ISE ?If someone have some information or can give me a clue how to proceed with this it would be much appreciated
Hi,
In a customers PI3.1.4 the 93180 comes up as "not supported device", although it says here that 9K should be supported:
http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-1/user/guide/pi_ug/maint_images.html
On the other hand...
HiIm doing CWA with my 3850 wlc, but the client seems to be stuck in "WEBAUTH_PEND " on the WLC client list.It all looks ok in the ISE logs and in the client detail i can see that it has gotten the redirect url, but nothing is happening. Someone who ...
HiIm setting up a Dot1X authentication using ISE 1.3 and 5760/3850 WLAN controllers. The problem is that im not able to match my authentication policy defined on ISE. It jumps directly to the default policy, im using Called Station id= SSID but it is...
HiDid you get a respone from Cisco on this ? Im having an issue where the client is stuck in "WEBAUTH_PEND " on my 3850. It all looks fine in ISE logs.
