Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I was just asked if a Meraki AP could be put in a area of our building that doesn't have switch access and sorta "repeat" the network to that space? I have a spare 2721. What would be my concern, if any?
I have a strange one. C9200 switch, 17.03.04b. Setting up a port for a postage machine. config as follows:ip dhcp pool cin-6address 10.3.6.2 client-id 0100.1b00.4116.4dinterface GigabitEthernet1/0/15description Postage machineswitchport access vlan 6...
I currently have a internet router at location A with BGP enabled. We now plan to bring up another BGP enabled router at another location. Both will use the same ISP. The two locations are linked together with a MAN link. How do I make the router a...
My Associate Director can not see the inventory for our contracts. How do I verify that she should have the access? Her profile looks the same as mine.
Currently running 6.2.3 of FirePower on a ASA 5525x. Have a requirement to block parts of LinkedIn functionality. Policy, Access control shows 5 subapps that could be blocked. From my experience blocking parts of Facebook, I had to decrypt Facebook t...
After thinking about it, I made a change to the diagram, sending the backup location traffic to the router handling the MAN. I think it would work better.Like I mentioned, this config was done by a consultant years ago. While the MPLS router does hav...
This is the BGP config in the primary, it was configured by a consultant many years ago. The backup, I assume, should be almost identical, with the exception of the ip endpoints:router bgp 10753bgp log-neighbor-changesneighbor 4.35.114.225 remote-as ...
