Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,We integrate our UC560 with Microsoft Lync and are having a strange problem which we have logged with Microsoft, the issue I have is that they advise IOS needs to be 12.4 and above and even though we are running 15.1 they are not convinced!!The re...
All,Cannot find an answer to this so thought I would ask on here!We are currently trying to get a door entry system working that pushes a feed out in either H264 OR MJPEG OR as a standard video call, we can access the feed from a simple HTTP site tha...
Hello,I have been searching high and low for an answer to this question but have got nowhere!We are currently using a WLC with a WPA2 pre shared key for public internet access, we use the web authentication form to force people to enter there email a...
Hi,I have not seen this done before and have had a request so thought I would ask after a couple of hours searching.Is it possible to have high availability between 2 UC560 systems i.e. a master and slave scenario, I have had a request from a client ...
Hi,It is a UC560 running CME 8.1 on IOS 15.1(2)T3c, as far as I am aware you cannot modify the user agent but I have just stepped through our config line by line as well as looked for various "user agent" related phrases and can find nothing on the s...
Thanks, I saw that option and was hoping that wasn't my only option!!I have a feeling I will be buying a certificate as I don't think we can remove HTTPS from the management interface due to PCI requiring all management traffic be encrypted with our ...
Hi,This is normal behavior, the UC500 will be picking the call up, dialing the transferred number via PSTN, SIP etc... and then connecting the 2 calls together.Unfortunately this is not like the type of divert you see when the PSTN do a call divert w...
This could be automated further by getting a server (or workstation) somewhere that has access to the UC500 and scheduling it to run your batch file regularly i.e. every hour or so. It is a shame you can't use the Kron job that is built within IOS bu...
