Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hi guys,i want to clarify these. Based on the cisco flash site on vtp, when u reboot a vtp client it will loose all the vlan info and the rev. # is set to zero. But i tried it out on our laboratory and doesnt work, i tried rebooting the client on a s...
hi guys,just like to verify this.RouterA has these routes from Router B.D 192.168.30.0/24 via 10.10.10.1O 192.168.30.0/28 via 10.10.10.1The question is what source of the route what would be used to route packets from RouterA to the IPAddress 192.168...
hi guys,How can i limit my redistribution from eigrp to BGP to only /24 networks? when i redistribute eigrp routes to bgp, /32 and /30 networks are also advertise unto bgp. i don't want this to happen, just want only /24 to be advertise by bgp. Doing...
hi guys,i have a 3640 router with 64/16 DRAM/Flash.im trying to put an ios of about 12M but has an error saying not enough space. the flash was a combination of 2x8M.tnx
Hi Rick,Got the info here. We are trying to deliver data(audio+video) from one country to another. The scenario would be from here (source) with 2 destination (other countries). We already have encoders, the problem is how to distribute this data to ...
The switch is in VTP client mode. I tried rebooting it and all the info i got from the VTP server is still on it. The site specified that the vlan info will not stay on the nvram thats why after reboot all the vlan info are erased.
Hi,If you see EIGRP having AD of 170, its External EIGRP, it was redistributed. You can use show ip route eigrp to determine which routes are installed on your RT.HTHjeff
Hi guys,My redistribution is working right now. When redistributing learned routes from bgp, can i see them on my routing table? I tried sh ip route on my router C and i cant see them.tnx.
