Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have configured summary-address on my ASBR in which BGP routes are being redistributed into ospf process 100.On ospf process 100, I have configured summary address 10.x.x.x.Does the summary-address look for the 10.x.x.x only from the redisti...
The scenario is we are using some Public AS number such as 30 on our private network. Now, we are connecting to our global netowrk via MPLS. AS number for the MPLS peering is 65123. The AS number that is to be seen in the MPLS cloud and at any other ...
I have a router which has OSPF area0 and and eBGP configured. I have the subnets such as 10.22.33.0/24 available through my OSPF and they are E2 / E1 routes. Also, I will be receiveing huge number of prefixes in 10.x.x.x range from the eBGP. I would ...
We have a router which is configured with few site-to-site VPN tunnels. Recently we have got new IP block and wish to use it for the tunnel establishment. Is it possible to achieve this on the same router. That is, can I use two different IP addresse...
Victor,Now my understanding is clear. Thanks for the explanation.In the topology diagram, I had indicated few routes in the OSPF domain just to indicate that these routes exist even when the summary address is configured. I had considered the longest...
Thanks Joe / Lamav.Couple of points to add.I have shown only a part of the prefixes available on the routing tables to make the scenario simpleThe prefixes shown in the core are the ones available when the BGP peering is up. These prefixes are availa...
As per my understanding , OSPF will summarize even if one prefix in the range being summarized exists i.e. ( if the summary-address is 10.0.0.0/8, i will see this summary route even if I have one subnet in that range exists in its routing table). Is ...
Thanks.The issue i am facing is , when the BGP goes down, the summary route does not get removed from the routing table.I could see the BGP peers to be down, but on the OSPF process, i have multiple O E1 / O E2 / O IA routes in 10.x.x.x subnet in OSP...
Hi LR, There is one router with AS 30, peering with another router with AS 31 (customer router) (which are in our private WAN network). The MPLS router with AS 65123(on the CPE,managed by us) will peer with the provider CE(mananged by the provider in...
