Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
When I would switch to a different interface policy group with the same content/settings (effectively renaming the policy group used) will there be any disruption in traffic? The current policy group is already used in port selectors and would ...
Hi,Installed Cisco Prime LMS last week. Everthing seems to be running fine. We configured LMS to send e-mail for certain events. One of them is operationallydown/up events. There are some devices for which we only want to see those events for some of...
Hi there,A few weeks ago I noticed that our 7206VXR routers could not be managed from Ciscoworks (devices were greyed out). This was no problem before. When I tried to reinstall (or even remove) the necessary device packages as part of my troubleshoo...
Hello,Currently I am experiencing a problem with a NAT configuration when I want to migrate to a new router. Currently we have a Cisco 3640 router with this NAT config:ip nat outside source static 10.10.10.1 10.90.3.1 extendableip nat outside source ...
Jon,This won't work for me, because I need to have the same port number (7000) for both translations. When I try your config including the portnumbers I get the same error message. Again, it's working fine on the current router. Here's a larger porti...
Hello Hetene,I am going to try this, but I am not sure this is actually the case. Please see my reply on the post from Jon for more inormation.Regards,Arjan
Jon,Thanks for your reply. I am certainly going to try the port number addition in the configuration and will post my findings here. But I am still not sure why it doesn't work in the way I have configured it.What I didn't mention in my first post is...
Still no solution found. I was wondering if this should work at all. Maybe the old IOS accepts those lines while it shouldn't? Sometimes bugs actually makes things work!
The problem remains when I run the latest IOS for this router (c3845-adventerprisek9-mz.124-23.bin). Ofcourse there are many other IOS versions to try, but I would like some more insight on this problem first.Thanks in advance for any replies!I wish ...
