Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I have a question on VPN map access list and routing in ASA. I am considering a scenario of an ASA firewall with VPN tunnel configured for outside interface and has static or dynamic routing running. An access list defines match for incoming traf...
I have VPLS link connecting three locations. Location A - vlan 100 for dataLocation B - Vlan 100 for data, vlan 200 for internet (both going through same link/same service provider)Location C - vlan 100 for dataFor location B I have to carry both Vla...
HiI am having a problem with a normal EIGRP routing configuration. Router Arouter eigrp 100 redistribute static network 10.1.0.0 0.0.255.255 network 10.250.1.1 0.0.0.0 network 10.250.1.8 0.0.0.7 network 10.250.1.16 0.0.0.7 network 10.250.2.8 0.0.0.7 ...
I have a basic question. I am having a problem with a HP switch and a Cat 3560. A 100mb uplink between them is giving very poor throughput. There are no problems in duplex/speed; STP is not running, no switching loop, no congestion, and no errors on ...
Hello,I am designing a network and security solution, I need some analytical information on MPLS and dedicated links, more on the performance and cost side. We have a typical scenario of network, offices in all major cities in the US and Europe. Exis...
Ok, I didnt mention this part. I am considering a GRE tunnel that runs under VPN and keeps the IPsec VPN always up. I am trying to follow the internal process. RegardsKapish
Hi,Any time if you see this message - No translation group found, means you are missing NAT or incorrect NATing. PIX will not work without NATing though access list is allowing the traffic. It needs some kind of NAT - NAT 0 (no NAT), static or dymani...
Hi, here your IP on outside interface is 10.10.10.6. In order to establish LAN to LAN VPN, on head office VPN router you need to set peer's public IP address for remote ASA but you don't have it as your remote ASA is behind the ADSL router and can no...
