About prakashcsco

prakashcsco · 01-29-2025

Due to business Requirement I need to setup Meraki MR46 and Cisco 9120AX Catalysts in parallel to each other. Its a One floor Building and We have 9800 Controller for Cisco 9120AX and cloud controller for Meraki.Since Development and R&D teams wants...

prakashcsco · 02-18-2023

We are using 9120 AX APs and 3504 controllers. In specific areas, wireless clients are a little high like 70 clients. They generally use Low data and sometimes Voice calls between them. IN that Specific Area three AP are installed and all three are ...

prakashcsco · 04-27-2022

HI if A company with 10.0.0.0/8 subnet acquired a company B which also having 10.0.0.0/8 range IP. how we can we resolve this scenario as both are using same subnet.

prakashcsco · 04-21-2022

In a scenario where we are using Remote access VPN with a Full tunnel and the user trying to reach 8.8.8.8 His LAN subnet 10.1.1.10/24. I want to know what will be the source and destination of the packet

prakashcsco · 12-12-2018

AP used cisco AIR-CAP3702I

prakashcsco · 02-22-2023

In the client scan for AP, I can see 3 APs. brcmfmac: [0] [6c:41:0e:45:8a:ee] [Channel: 157] [RSSI = -49] [CU = 5%]brcmfmac: [1] [6c:41:0e:45:95:6e] [Channel: 153] [RSSI = -58] [CU = 8%]brcmfmac: [2] [6c:41:0e:45:c2:8e] [Channel: 161] [RSSI = -70] [C...

prakashcsco · 02-19-2023

Most of the clients choose that AP ex AP 7 and other clients connect to AP 6 or AP 8.

prakashcsco · 02-19-2023

HI,Yes power level are same as set to 2

prakashcsco · 04-27-2022

Adding some details Company A have DMVPN and using EIGRP for routing.

prakashcsco · 04-27-2022

Additing some details Company have DMVPN and using EIGRP for routing.

Member Since	‎06-01-2015 08:34 PM
Date Last Visited	‎02-19-2025 08:36 PM
Posts	22
Total Helpful Votes Received	10

User Statistics

User Activity

Setting Meraki MR46 and Cisco 9120AX in Parallel

Wireless Clients ( 5 GHz ) preferring ONE AP in the AREA

Company acquired Subnet issues

Remote access VPN Traffic

Cisco 3850 WLC controller clients always prefer 2.4 ghz instead of 5 ghz. its working when we manually connect to 5 ghz. is there any way to balance both of them.

Re: Wireless Clients ( 5 GHz ) preferring ONE AP in the AREA

Re: Wireless Clients ( 5 GHz ) preferring ONE AP in the AREA

Re: Wireless Clients ( 5 GHz ) preferring ONE AP in the AREA

Re: Company acquired Subnet issues

Re: Company acquired Subnet issues