Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,we have a Cisco US 9 environment. but no physical phone. we only use Jabber.Is there a way to use Jabber to initiate a Meet me conference? RegardsRassoul
Hi Guys,I have the below network. Here is the senario.OSPF process 1000Firewall is in area 2 and 1 and 0Switch1 is in area 2 and 1 (not 0)Internal switch is in area 1 onlyRouter1 is in area2 onlyAs you see I want to transfer the default route from Ro...
Hi,Any body know if we can achieve this:A PC connected to a Cisco 877 router and 877 router is connected to another router (7301) via GRE tunnel,Cisco 7301 router is a NAS server and is being used as a PPPOE server.If user create a PPPOE connection o...
Hi,I have got a fax machine connected to fxs on Cisco call manager express,I have got a SIP trunk set up on the Cisco box and a DID number for FAX, so basically a sip call will come in and connect to the fxs and fax,problem I have got is outgoing fa...
Hi,The main reason of having firewall only on area 0 and not the switches is area 0 will have some servers connect to it. It is basically the DMZ area. So what is somebody set the ip address of the switch on area 0 as gateway?! This will be a securit...
If we do your sugestion still traffic from Internal switch can go to the switch 1 and then the router 1. It can bypass the firewall.The important aim here is to have the ip address of the firewall as the defaul gateway for Internal switch.However the...
Solarwinds has got a free one, however if you need an enterprice one must pay:http://www.network-blog.com/ittech/post/2011/11/09/Netflow-configuration-and-traffic-analyzer-on-Cisco-devices-with-Solarwinds-free-software.aspx
This might be good to check:http://www.network-blog.com/ittech/post/2011/11/09/Netflow-configuration-and-traffic-analyzer-on-Cisco-devices-with-Solarwinds-free-software.aspx
