Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
As attached in the above screenshot none of the client devices show neighboring AP in Network Summary. Is this expected behavior?FYI, the client can see all the APs but the Cisco 150AX AP is not reporting the same. Is there something I am missing?
I am using 3 AX150 AP in the home environment (700sq.ft with 10-15 clients) and even with the default setting client keeps disconnecting and fails to do seamless roaming with FT enabled with wpa2. With wpa3 roaming doesn't even work. Earlier I was u...
AFAIK RRM means 802.11v and 802.11k support. Even the client shows AP has 802.11k and 802.11v support. These APs have integrated/embedded controllers (or whatever it is called). It should show the data.PS: just for fun I went through techsupport bund...
Client stick is not clients problem.. it is APs responsibility to let client know nearest APs. Moreover, openwrt has better implementation of seamless roaming compared to cisco 150ax ap. The same client which roams seamlessly on openwrt APs with wpa3...
Yeah, apparently that is limitation of cisco. Because openwrt support wpa3roaming seamlessly. I have checked log tried googling, searching on forum but nothing significant coming up in logsAnd I have configured with wpa2 personal with FT enabled. AX1...
