Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
There's a known bug that makes upgrading via HTTP impossible, but using TFTP on the apciscoshell returns a "no space left on device" error.
This is the shell output:
archive download-sw /reload tftp://10.252.190.77/ap1g4############################...
Hello,We have a 7.1 CME on a 3851 that has been running well for the past month. We are currently receiving number caller ID from the Telco and it is getting displayed on the phones. We would like to get caller name to come up on the phones along w...
Finally figured out my issue. We replaced an outdated ACS with ISE, but weren't able to use the ACS IP in the new server, so we added a NAT to redirect all traffic on our firewall to ISE's new IP. Unfortunately this NAT was also interfering with NATt...
I'm not using a tar file. If you look at the archive download command, I'm using the ap1g4 file from the .zip file, and downloading it from the TFTP server.
The file is not written properly on flash due to lack of space, so when the checksum is run, ...
