Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have 2 WAAS central managers in our deployment in different data centres. The secondary has recently been removed as it was EOL and a new WAVE594 bought to replace it.Unfortunately the old standby central manager is still listed in the primary cen...
I am looking for a global web filtering solution for our business but am having trouble finding a solution that will work acceptably for us globally.The problem is that our campany has hundreds of very small offices (mostly only 2-3 users with the od...
Hi,We have a webserver behind an ASA 5520 which has a static NAT setup to forward TCP port 80 traffic through to the private address of the server on port 80 which is working fine.We are having an issue with one site on the internet being unable to a...
We have recently upgraded our phone system from CM 4.2(3) to 7.1(3a). The upgraded system is working well, but users have found that when they reboot their phones or login or out of Extension Mobility (and therefore reset the phones), an error messag...
We have an MCS-7825-I4 server which we are installing Unity 7.0 onto. We have setup the 2 disks as RAID 1 in the BIOS and then boot from the correct Cisco Platform DVD. The Cisco setup then resets the RAID to 2 separate disks instead of RAID 1 and in...
Hi,We have tried issuing the "cms deregister force" command from the new central manager but it will not accept it as it says it is not registered so this command won't work.If we had the old central manager still I'm sure this command would do the j...
Many thanks for the response.We do use the identity recover procedure for replacing accelerators sometimes. Unfortunately it doesn't seem to be an option for standby central managers as the option to mark it as replaceable on the GUI is not there.If ...
Ah that is a shame, but thank you very much for testing it out for me.How about if we changed just the external IP address for port 81, e.g. (using your lab example):static (inside,outside) tcp 100.1.1.2 www 192.168.0.2 www netmask 255.255.255.255sta...
