Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Is there a way to cherry pick a dot1q tagged packet to not have the q-in-q tag added to it while q-in-q tagging all other dot1q packets coming in on an interface?This is on a Cisco 3750 configured for q-in-q with the 'switchport mode dot1q-tunnel' co...
We are wanting to be able to track machines as they move around our campus. Is there a way for the switch to send the MAC address it learns on a given port to a central loging server with the MAC, port number and switch ID? How is this accomplished...
I have a Pix 515 with a 2 interfaces that currently supports both client VPN connections and an office to office connection. I need the client users to be able to access the office connection all on this same Pix. How does this work?
I have a VPN tunnel up between a Pix 501 (I own) and a Cisco router (owned by another company). We want a way to verify we can get to specfic devices on the other side of the tunnel. Pings fail and when I do a traceroute the last hop is the router ...
I have a Cisco 3500 switch with a dot1q trunk back to a Cisco 2950-24 switch. The trunk crosses a 2 bridges that converts from Ethernet to T1 and back. All traffic traverses this bridge just fine EXCEPT Internet traffic. All vlans directly connect...
Yes, I am aware of that. What I really want to avoid is having to passive 60-some interfaces just for one to work. I was hoping there would be a way to apply to just one interface.
Anything else in the DMZ works just fine, it is just this particular communication.Here are my static statements between the DMZ and the inside interface:static (inside,DMZ) 10.1.0.0 10.1.0.0 netmask 255.255.0.0 0 0 static (inside,DMZ) 10.2.0.0 10.2....
I have no access-list on my internal interface and I am using a 525 running 6.2(2) and no VPN. The vendor who runs this application claims that SOME firewalls don't handle MTS correctly, but I can not find anything that says the Pix has any such pro...
Again, this allows me to get to the box using my public address, but I can't telnet or FTP to it using the private IP (10.1.241.69). I can ping it though, so I am seeing a TCP problem....?
Same problem. I can now reach the web site with my browser, but we cannot telnet or ftp to the box for maintenance using the private IP address. I remove the alias command and I can telnet to it, but then I can't reach the web site. I would think ...
