Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, I´m a Networkengineer and CiscoWorks2000admin, and we have two NAM2-modules in our Cat6513. I would like adding this NAM Modules, but I have then Device Attribute Errors "Local User: Incorrect". Now my Question: Is that action correct or must I N...
Hallo,I have a cat6513 with NAM2. On Switch run´s native IOS version 12.1(13)E4 and on the NAM ist the Version 3.1.1a installed. And now my problem, i have established a span-session over the GUI. If I look after 1 hour in the MONITOR-TAB, there are ...
Hi Meena,I?ve the same problem. It seems that the cisco ACS don?t support ssh and password aging. and there is unfortunately no existing workaround. please follow this link.http://www.cisco.com/univercd/cc/td/doc/product/access/acs_soft/csacs4nt/a...
Hi,I have the latest LMS and a problem as follows. If I adding a device (Cat 6506 IOS) in RME to manage it via SSH, the following Errormassage in " check device attribute" appears: "LOcal User: failed". On this device, security reason, only SSH is su...
thanks rmushtag,it seems that i'm a blind networkengineer, because i look many times on my NAM and cant't find the appropriate command to enable remote access. I have a second question. Can I configure another local user then root on NAM?thanks marc...
Hi, Josephthanks for the tip to clear the NAM-config. it function now proper.After i cleared the config and established a new span-session, the nam get´s app´s data.best regards from berlin/germany,marcel leitel
