Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Additional input for below bug. The same happens when you try to edit Network Devices settings. Whenever I try to save an inherited Device, it won't save the configuration with message: "You have entered text that appears to contain unsupported tags ...
Hi all,I have a subinterface configured for a secured VLAN. To secure the VLAN I implemented ACLs in both directions. To allow return traffic from TCP sessions I ended both ACLs with 'permit tcp any any established'.However, by having tcp established...
Hi,We have bought four identical 3750X switches with identical SW-images: 12.2(55)SE3 C3750E-UNIVERSALK9-MWe initially connected two switches, this resulted in forming a stack.With the other two switches we wanted to do the same thing. Howev...
Hi all,I have this situation that we need a static ARP entry for Microsoft NLB. In our HSRP-router setup we have to configure this static ARP entry on both routers (of course). During a failover the second router will provide communication to the NLB...
Solution: make sure the file is being copied fully.
The file I sent seemed to transfer successfully, but in the end it did not, the file size was only 1.2Gb. I did not receive errors along the way and assumed file transfer was successful.
I tried u...
Hi,
Encountering the same issue here.
- Hashes inconsistent
- filename not including .tar.
- error message "Unable the unbundle, it should be in tar.gz format.
Any luck with tackling this issue?
Hi,Probably this won't help the originator of this request, but maybe anyone that runs into this from now on. I ran into this problem when installing Siemens WLC Scalance equipment which uses SLP to send the WLC IP address to the remote APs. Via wire...
Hi Nick,It's more like this VLAN used to be completely seperated and production-only and I opened it up a little bit with these ACLs for NTP and some access for the systemadministrators. That's why I have to cover both IN and OUT bound. A few months ...
Got it!While ordered all IP Base feature license, one has been shipped with Lan Base. Within show version it says it all (overlooked at the first time)License Level: lanbaseLicense Type: Default. No valid license found. Next reload license Level: lan...
