Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Users in remote site can get ping response but no http service from local web server where the local web server also has NAT rule allowing access from WAN. In the below config, users in remote 10.10.10.160/27 can ping 10.10.10.30 and 10.10.10.95, but...
I have both a Easy VPN server and a site-to-site VPN on the same outside interface of a 2911 router.Currently, a Easy VPN client has no route int the router then out the site-to-site VPN to the remote site.How can I create this route?Building configu...
On my 2911 router, can I have both an Easy VPN server, and a site-to-site VPN?Also, with an Easy VPN, is it possible to specify another internet (outside) IP address in my assigned range as the address remote users use . . . rather than the specific ...
When I try to connect from remote host to SSL VPN on 2911 router, I get following errors:Cisco Systems VPN Client Version 5.0.07.0410Copyright (C) 1998-2010 Cisco Systems, Inc. All Rights Reserved.Client Type(s): Windows, WinNTRunning on: 5.1.2600 Se...
Thanks so much, Herbert.As an alternative to what you suggest, what do you think of this? I got it from Cisco's support document, http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_example09186a0080094634.shtmlI would delete thes...
Thanks, Somu.But I am confused. First, the link you provided id dead.Second, the document http://www.cisco.com/en/US/docs/routers/access/interfaces/nm/hardware/installation/guide/InstNetM.htmlstates:Note The following routers do not support online i...
I have successfully implented both a site-to-site VPN, and an Easy VPN server. The outside IP for each service is the same, i.e. 65.19.62.60. This is the IP address assigned to GE0/0.But I do not like this; I would like to move one of the services, p...
Using CCP I deleted the SSL VPN. Instead I created an EasyVPN. Although my EasyVPN passed the "Test VPN", I still have inability to connect via VPN client 5.I have a site to site VPN which is working properly.I cannot see where I specify the internet...
