Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, I have a 4500x VSS system located in 2 different switch rooms and i need to move the fiber that one of the VSL connections are on.lets call it te1/1/1 -> te2/1/1 and te1/1/2 -_> te2/1/2if you shut off te1/1/2 would the whole stack freak out?My...
Hello Community, I have read the article - https://www.cisco.com/c/en/us/support/docs/wireless/catalyst-9800-series-wireless-controllers/213913-building-mobility-tunnels-on-catalyst-98.htmlI want to enable the mobility between 2 of my controllers to ...
Hello, I just migrated from an ASR9001 with 6.3.3 to a NCS-57C3 with 7.7.2, Config is almost the same and everything is working as it should.I have 4 BVI interfaces, which i know for a fact are moving data, are reporting on 3 of my SNMP servers that...
Hello, For the past 2 months I just noticed that my Thursday Night -> Friday Morning discovery is failing. I go to look at the logs and its empty, Ideas on where to look to find where it might be failing? Thanks, -Mike
Hello, Not sure if we hit a bug or a caveat of software with this situation. We have a 6807 vss pair that has a Layer 3 pagp Port channel to a 4500x vss pair. When we converted over to this L3 port channel, we had reachability issues across the Port-...
Thanks again for the response.Not the same IP pool, client vlans based on geographic area, each client group is a /20I can not find the DHCP timeout in the config, cli, looking at best practice says its a fixed value of 120.I have a tac case open...
