Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
- Cisco Community
- :
- About Guillaume Menu
02-20-2019
Stats
Member since
12-23-2010
20
Posts
0
Helpful
0
Solutions
Created by
Guillaume Menu
in IP Telephony and Phones
in IP Telephony and Phones
12-17-2012
11:23 PM
12-17-2012
11:23 PM
Thank you leosalcie, but this is not answering my question, I know it will technically work, but I would like to know what are the rules form a licensing point of view. I Cisco licensing team, any answer to this? Thx G
... View more
Created by
Guillaume Menu
in IP Telephony and Phones
in IP Telephony and Phones
12-17-2012
08:29 AM
12-17-2012
08:29 AM
Hello, I have a question regarding CUWL Public licenses and Extension Mobility: - It is about CUWL Pro users that are travelling to another office for example (on the same cluster). Are CUWL Pro user allowed to use Extension Mobility on a Public device to have their own extension on it? It seems as a basic question and I was always said "Yes", but then when you look into the CUWL 8.6 ordering guide page 12, it says: “The RTU license for the corresponding phone will be provided, and no applications (for example, voicemail, presence, extension mobility, conferencing, or any other applications) may be used with these phones other than Cisco Unified Communications Manager” ? Does this sentence means that the PUBLIC phone device can NOT have the application itself so a PRO user can NOT log into it, or does it mean that the public phone extenmsion is not able to move to another phone via extension mobility (which seems obvious since it is a public phone)? Thanks a lot for clarifying this aspect. BR G
... View more
Labels:
01-20-2012
02:07 AM
Hi Paolo, likely not, but in reality it makes all the difference.... 15.1(1)T doesn't work, 15.1(4)M3 works like a charm wirh default telme config! My issue is that I can't use CME 8.6 but rather lower version. Does anyone have experience with the following IOS and E1 R2 in mexico from Telmex? Like: - 15.0(1)M CME 7.1 which is the recommended cisco version BTW - 15.1(2)T CME 8.1 - 15.1(3)T CME 8.5 Thx in advance G
... View more
01-18-2012
06:35 AM
Well according to cisco doc and other config I've seen, the Telmex config is very specific and need the other parameters as well. Source: http://www.cisco.com/en/US/tech/tk652/tk653/technologies_tech_note09186a008024903b.shtml#mexico Mexico Telmex Modified controller E1 0/0
framing NO-CRC4
ds0-group 1 timeslots 1-15,17-30 type r2-digital r2-compelled ani
cas-custom 1
country telmex
category 2
answer-signal group-b 1 Note: In some implementations, Telmex requires that Group A signals be used for automatic number identification (ANI) collection. If this is needed, add the command groupa-callerid-end under cas-custom . If this command is not configured, the router uses the country default (a Group C signal).
... View more
01-18-2012
06:03 AM
There is a translation-rule as well that I didn't copy/paste in the config to remove the 9. The dial-peer hitted is dial-peer 900, from the trace: *Jan 17 21:22:39.031: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_request_call: Mode=0, Peer=900 The call are going to the E1 port, it is not a dial-peer issue, it is an E1 R2 issue. If I'm trying an incoming call, same pb, it doesn't go further than the E1 (debug voip ccapi inout don't even show a line)
... View more
01-18-2012
05:54 AM
Hi Alex, very good point. But of course, I had this command in the config when I tested. They were not present when I did the copy/paste because my colleague shutdown the port to try something. But the calls are going to the ports (otherwise the debug would no show any r2 info)
... View more
01-18-2012
05:21 AM
Thx, but I already went accross all those doc and couldn't find any hint on how to proceed further. Anyone having good or bad experiences with Telmex in Mexico??
... View more
01-18-2012
04:46 AM
Hello, I am struggling to setup an E1 R2 connection from Telmex in Mexico on a 2921 CME router. I have already tried the config found on cisco.com as well as many variant I found on several forums/web site. This E1 is a new connection in a new location --> it was never used before so I'm not able to say for sure it is working correctely (eventhought Telco said it is) Hereafter is what I configured (please note that it is supposed to be a 10 channls E1): controller E1 0/0/0 framing NO-CRC4 line-termination 75-ohm ds0-group 1 timeslots 1-10 type r2-digital r2-compelled ani cas-custom 1 country telmex category 2 answer-signal group-b 1 groupa-callerid-end voice-port 0/0/0:1 cptone MX dial-peer voice 1 pots description --- Inbound Calls incoming called-number . direct-inward-dial ! dial-peer voice 940 pots description --- Outbound- Local&National Mobile Calls destination-pattern 904[45]T forward-digits all ! dial-peer voice 900 pots description --- Outbound Telmex - Local Calls 8 digit destination-pattern 9[1-9].......$ forward-digits all ! dial-peer voice 9 pots description --- Outbound Telmex - Intl destination-pattern 9T forward-digits all I'm not able to get incoming calls as well as outgoing calls. The destination phoines don't even ring From your experiences, did it happened to you already? Shall I insist on the Telco to doublecheck? What could be the missing part? What I understood from the telco guy is the following: They want the CME to send A2 before sending the digit to clear the channel. Since it is not doing it, an interdigit timeout is happeneing on their side before all the digit are sent by the CME. But I'm not 100% sure of this interpretation??!? Hereafter are some debug for an outgoing calls from extension 1710: *Jan 17 21:22:39.031: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_process_event: [state:S_DIGIT_COLLECT, event:E_CC_PROCEEDING] *Jan 17 21:22:39.031: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/act_dcollect_proc: *Jan 17 21:22:39.031: //-1/xxxxxxxxxxxx/VTSP:(0/0/0:1):-1:-1:-1/vtsp_process_event: [state:INVALID STATE MACHINE, event:E_CC_SETUP_REQ] *Jan 17 21:22:39.031: //6/34E06DD18012/VTSP:(0/0/0:1):-1:-1:-1/vtsp_og_call_req: Echo Cancel=TRUE, Gain Control=0 Auto Gain Control=FALSE, Dual Tone Detect Mask=0x0, Seq Tone Detect=FALSE *Jan 17 21:22:39.031: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_SETUP_REQ_PEND, event:E_VTSP_DSM_OPEN_SUCCESS] *Jan 17 21:22:39.031: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/act_setup_req_pend_succ: *Jan 17 21:22:39.031: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_request_call: Mode=0, Peer=900 *Jan 17 21:22:39.031: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_request_call: Progress Indication=3, Info Trans Capability=0 Calling Number=1710, TON=Unknown, NPI=Unknown, Screening=Not Screened, Presentation=Allowed Called Number=21225500, TON=Unknown, NPI=Unknown *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_SETUP_REQUEST, event:E_TSP_PROCEEDING] *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/act_setup_pend_proceeding: *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_timer: Timer Start Time=123253, Timer Value=25000(ms) *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/act_setup_pend_proceeding: Peer=900, Progress Indication=0, Return Code=2 *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_NULL, event:E_TSP_R2_DIAL] *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/act_setup_req_pend_defer: Event=19 *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_NULL, event:E_TSP_R2_DIAL] *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/act_setup_req_pend_defer: Event=19 *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_NULL, event:E_VTSP_DSM_OPEN_SUCCESS] *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/act_setup_req_wait_pend_success: Event=75 *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_timer_stop: Timer Stop Time=123253 *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/act_setup_r2_pend_dial: Digits=#, Tone Mode=1 *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=# *Jan 17 21:22:39.319: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=2 *Jan 17 21:22:39.519: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:22:39.623: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DIGIT_BEGIN] *Jan 17 21:22:39.623: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_TSP_R2_DIAL] *Jan 17 21:22:39.623: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=# *Jan 17 21:22:49.519: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:22:49.591: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DIGIT_END] *Jan 17 21:22:49.591: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_TSP_R2_DIAL] *Jan 17 21:22:49.591: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=1 *Jan 17 21:22:49.711: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:22:49.823: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DIGIT_BEGIN] *Jan 17 21:22:49.823: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_TSP_R2_DIAL] *Jan 17 21:22:49.823: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=# *Jan 17 21:22:59.711: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:22:59.791: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DIGIT_END] *Jan 17 21:22:59.791: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_TSP_R2_DIAL] *Jan 17 21:22:59.791: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=2 *Jan 17 21:22:59.911: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:23:00.019: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DIGIT_BEGIN] *Jan 17 21:23:00.019: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_TSP_R2_DIAL] *Jan 17 21:23:00.019: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=# *Jan 17 21:23:09.911: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:23:09.991: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DIGIT_END] *Jan 17 21:23:09.991: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_TSP_R2_DIAL] *Jan 17 21:23:09.991: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=2 *Jan 17 21:23:10.111: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:23:10.231: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DIGIT_BEGIN] *Jan 17 21:23:10.231: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_TSP_R2_DIAL] *Jan 17 21:23:10.231: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=# *Jan 17 21:23:20.111: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:23:20.183: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DIGIT_END] *Jan 17 21:23:20.183: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_TSP_R2_DIAL] *Jan 17 21:23:20.183: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=5 *Jan 17 21:23:20.311: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:23:20.411: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_VTSP_DIGIT_BEGIN] *Jan 17 21:23:20.411: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_TSP_R2_DIAL] *Jan 17 21:23:20.411: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=# *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_process_event: [state:S_PROCEEDING, event:E_TSP_DISCONNECT_IND] *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/act_generate_disc: Cause Value=16 *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_timer_stop: Timer Stop Time=128235 *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_ring_noan_timer_stop: Timer Stop Time=128235 *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_set_release_source: Release Direction=PSTN, Release Source=Calling Party-PSTN *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_timer: Timer Start Time=128235, Timer Value=15000(ms) *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/act_generate_disc: Return Code=0 *Jan 17 21:23:29.139: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_DIALING_COMP, event:E_CC_DISCONNECT] *Jan 17 21:23:29.139: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/ds_dialing_release: *Jan 17 21:23:29.139: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/ds_dial_event_check: *Jan 17 21:23:29.139: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/act_setup_pend_dial_comp: *Jan 17 21:23:29.139: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/act_disconnect: Cause Value=16 *Jan 17 21:23:29.139: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_ring_noan_timer_stop: Timer Stop Time=128235 *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_process_event: [state:S_WAIT_HOST_DISC, event:E_CC_DISCONNECT] *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/act_host_disc_cleanup: dsm_indicate_error=0, short_cleardown_timeout=1, Mode=0 *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_dsm_save_fax_config: Call Entry=NULL, Call Id=-1 *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/act_host_disc_cleanup: Exit State=16 *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_process_event: [state:S_WAIT_STATS, event:E_VTSP_DSM_STATS_COMPLETE] *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/act_dsm_dsp_stats_complete: *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_timer: Timer Start Time=128235, Timer Value=60000(ms) *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_process_event: [state:S_WAIT_RELEASE, event:E_VTSP_DSM_STATS_COMPLETE] *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_process_event: Unexpected EVENT [E_VTSP_DSM_STATS_COMPLETE] Received For STATE [S_WAIT_RELEASE]; Previous STATE [0.16 ] *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_process_event: [state:S_WAIT_RELEASE, event:E_TSP_DISCONNECT_CONF] *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/act_wrelease_release: *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_play_busy_timer_stop: Timer Stop Time=128235 *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_timer_stop: Timer Stop Time=128235 *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:0:1/vtsp_is_valid_dsm_handle: DMGR=0x31A08A2C, VTSP CDB=0x3000FA80 *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:-1:-1/vtsp_process_event: [state:S_CLOSE_DSPRM, event:E_VTSP_DSM_CLOSE_COMPLETE] *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:-1:-1/act_terminate: *Jan 17 21:23:29.139: //5/34E06DD18012/VTSP:(50/0/1):-1:-1:-1/vtsp_timer_stop: Timer Stop Time=128235 *Jan 17 21:23:29.139: //-1/34E06DD18012/VTSP:(50/0/1):-1:-1:-1/vtsp_free_cdb: CDB=0x3000FA80 *Jan 17 21:23:30.311: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_WAIT_STATS, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:23:30.311: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: Unexpected EVENT [E_VTSP_DSM_DIALING_COMPLETE] Received For STATE [S_WAIT_STATS]; Previous STATE [0.11 ] *Jan 17 21:23:30.391: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_WAIT_STATS, event:E_VTSP_DIGIT_END] *Jan 17 21:23:30.391: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: Unexpected EVENT [E_VTSP_DIGIT_END] Received For STATE [S_WAIT_STATS]; Previous STATE [0.11 ] *Jan 17 21:23:30.511: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_WAIT_STATS, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:23:30.511: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: Unexpected EVENT [E_VTSP_DSM_DIALING_COMPLETE] Received For STATE [S_WAIT_STATS]; Previous STATE [0.11 ] *Jan 17 21:23:30.511: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_WAIT_STATS, event:E_VTSP_DSM_STATS_COMPLETE] *Jan 17 21:23:30.511: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/act_dsm_dsp_stats_complete: *Jan 17 21:23:30.511: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_timer: Timer Start Time=128372, Timer Value=60000(ms) *Jan 17 21:23:30.511: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_WAIT_RELEASE, event:E_VTSP_DSM_STATS_COMPLETE] *Jan 17 21:23:30.511: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: Unexpected EVENT [E_VTSP_DSM_STATS_COMPLETE] Received For STATE [S_WAIT_RELEASE]; Previous STATE [0.16 ] *Jan 17 21:23:30.595: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_WAIT_RELEASE, event:E_TSP_DISCONNECT_CONF] *Jan 17 21:23:30.595: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/act_wrelease_release: *Jan 17 21:23:30.595: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_play_busy_timer_stop: Timer Stop Time=128381 *Jan 17 21:23:30.595: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_timer_stop: Timer Stop Time=128381 *Jan 17 21:23:30.595: //6/34E06DD18012/VTSP:(0/0/0:1):-1:1:1/vtsp_is_valid_dsm_handle: DMGR=0x300438F4, VTSP CDB=0x3000F7B8 *Jan 17 21:23:30.595: //6/34E06DD18012/VTSP:(0/0/0:1):-1:-1:-1/vtsp_process_event: [state:S_CLOSE_DSPRM, event:E_VTSP_DSM_CLOSE_COMPLETE] *Jan 17 21:23:30.595: //6/34E06DD18012/VTSP:(0/0/0:1):-1:-1:-1/act_terminate: *Jan 17 21:23:30.595: //6/34E06DD18012/VTSP:(0/0/0:1):-1:-1:-1/vtsp_timer_stop: Timer Stop Time=128381 *Jan 17 21:23:30.599: //-1/34E06DD18012/VTSP:(0/0/0:1):-1:-1:-1/vtsp_free_cdb: CDB=0x3000F7B8 *Jan 17 21:23:45.611: //-1/xxxxxxxxxxxx/VTSP:(0/0/0:1):-1:-1:-1/vtsp_allocate_cdb: CDB=0x3000FD48 *Jan 17 21:23:45.611: //-1/xxxxxxxxxxxx/VTSP:(0/0/0:1):-1:-1:-1/vtsp_do_call_setup_ind: Event=E_TSP_R2_START_DIGIT Progress Indication=0, CarrierIDCode=, Info Trans Capability=0, Source Carrier ID=, tg_label_flag=0 *Jan 17 21:23:45.611: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:-1:-1/vtsp_insert_cdb: *Jan 17 21:23:45.611: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:-1:-1/vtsp_do_call_setup_ind: Redirect Number=, Redirect Reason=0 *Jan 17 21:23:45.611: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_PENDING, event:E_VTSP_DSM_OPEN_SUCCESS] *Jan 17 21:23:45.791: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_COLLECT, event:E_VTSP_DIGIT_BEGIN] *Jan 17 21:23:45.791: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_COLLECT, event:E_TSP_R2_DIAL] *Jan 17 21:23:45.791: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=1 *Jan 17 21:23:45.883: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_COLLECT, event:E_VTSP_DIGIT_END] *Jan 17 21:23:45.883: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_COLLECT, event:E_TSP_R2_DIAL] *Jan 17 21:23:45.883: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=# *Jan 17 21:23:48.791: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_COLLECT, event:E_TSP_R2_DIAL] *Jan 17 21:23:48.791: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=# *Jan 17 21:23:48.791: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_COLLECT, event:E_TSP_R2_DIAL] *Jan 17 21:23:48.791: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/ds_do_dial: Digits To Dial=4# *Jan 17 21:23:48.791: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_COLLECT, event:E_TSP_DISCONNECT_IND] *Jan 17 21:23:55.791: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_WAIT_RELEASE, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:23:55.863: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_WAIT_RELEASE, event:E_VTSP_DIGIT_BEGIN] *Jan 17 21:23:55.983: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_WAIT_RELEASE, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:23:56.183: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_WAIT_RELEASE, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:23:56.283: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_WAIT_RELEASE, event:E_VTSP_DIGIT_END] *Jan 17 21:23:56.563: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_WAIT_RELEASE, event:E_VTSP_DSM_DIALING_COMPLETE] *Jan 17 21:23:58.675: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:1:1/vtsp_process_event: [state:S_R2_WAIT_RELEASE, event:E_TSP_DISCONNECT_CONF] *Jan 17 21:23:58.675: //-1/5F4823EB8017/VTSP:(0/0/0:1):-1:-1:-1/vtsp_process_event: [state:S_R2_WAIT_CLOSE, event:E_VTSP_DSM_CLOSE_COMPLETE] *Jan 17 21:23:58.675: //-1/5F4823EB8017/VTSP:():-1:-1:-1/vtsp_free_cdb: CDB=0x3000FD48
... View more
Labels:
Created by
Guillaume Menu
in IP Telephony and Phones
in IP Telephony and Phones
02-16-2011
07:36 AM
02-16-2011
07:36 AM
Thx Paolo for your answers. That's much appreciated. From my initial questions, anyone able to comment on them : - Since the code is common between CME and UC500, does this also work with CME (not mentionned as a CME possibility in the doc)? - If yes, what IOS license do we need on the 29/3900? (ie is there any conflict with the new enforced licences) - Is it TAC supported? For memory, the config proposed is the following (except the CUE step to redirect eh call on the configured service): https://supportforums.cisco.com/docs/DOC-9795#Does_the_UC500_support_Dial_Inward_System_Access_DISA Thanks in advance G
... View more
Created by
Guillaume Menu
in IP Telephony and Phones
in IP Telephony and Phones
02-15-2011
12:04 AM
02-15-2011
12:04 AM
Hi Paolo, Thx for your answer. I don't really understand why you said the DISA is CUE based. For me what is presented in the url is more CME based. The only part tied to CUE is the selection in the AA in order to match the right Dialpeer for the DISA. But the DISA features is done in the CME by the following application : application service clid_col_npw_npw param uid-length 3 I think it is not a big deal to match a DID directely with the dialpeer and remove the cue AA part. Am I wrong here in my assumptions? Furthermore, my concern is more about the support of this service in CME. I know that with ISR G2, licenses are enforced, so my question are still : - Would it work on CME with ISR G2 (or is there a needed licences to use the embedded "service clid_col_npw_npw"? - Is it TAC supported? Thanks in advance for any complementary help. best regards G PS: Paolo, I've looked in your profile, but was unable to find a disa link
... View more
Created by
Guillaume Menu
in IP Telephony and Phones
in IP Telephony and Phones
02-14-2011
08:20 AM
02-14-2011
08:20 AM
Hi all, I have a customer who need to have DISA service on his CME. I have done some research and only find reference to a UC500 tweak to allow it: https://supportforums.cisco.com/docs/DOC-9795#Does_the_UC500_support_Dial_Inward_System_Access_DISA My questions are: - Since the code is common between CME and UC500, does this also work with CME? - If yes, what IOS license do we need on the 29/3900? - Is it TAC supported? Thx a lot in advance G
... View more
Labels:
Created by
Guillaume Menu
in Collaboration Applications
04-02-2015
04-02-2015
Hi there,I have a question about Webex Meeting Server 2.5:- Who can
schedule a meeting, only the hos...
Created by
Guillaume Menu
in IP Telephony and Phones
12-17-2012
12-17-2012
Thank you leosalcie, but this is not answering my question, I know it
will technically work, but I w...
Created by
Guillaume Menu
in IP Telephony and Phones
12-17-2012
12-17-2012
Hello,I have a question regarding CUWL Public licenses and Extension
Mobility:- It is about CUWL Pro...
Created by
Guillaume Menu
in IP Telephony and Phones
07-25-2012
07-25-2012
Hello,Is there any technical restriction in CUCM NIC teaming that
prevent from doing it on 2 redunda...
01-20-2012
Hi Paolo,likely not, but in reality it makes all the difference....
15.1(1)T doesn't work, 15.1(4)M3...
01-18-2012
Well according to cisco doc and other config I've seen, the Telmex
config is very specific and need ...
01-18-2012
There is a translation-rule as well that I didn't copy/paste in the
config to remove the 9.The dial-...
01-18-2012
Hi Alex,very good point. But of course, I had this command in the config
when I tested. They were no...
01-18-2012
Thx, but I already went accross all those doc and couldn't find any hint
on how to proceed further.A...
01-18-2012
Hello,I am struggling to setup an E1 R2 connection from Telmex in Mexico
on a 2921 CME router. I hav...
Created by
Guillaume Menu
in Unified Communications Infrastructure
02-22-2011
02-22-2011
Anyone from licensing here?
Created by
Guillaume Menu
in Unified Communications Infrastructure
02-16-2011
02-16-2011
Anyone from licensing willing to have a look at this?Thx in advanceG
Created by
Guillaume Menu
in IP Telephony and Phones
02-16-2011
02-16-2011
Thx Paolo for your answers. That's much appreciated.From my initial
questions, anyone able to commen...
Created by
Guillaume Menu
in IP Telephony and Phones
02-15-2011
02-15-2011
Hi Paolo,Thx for your answer.I don't really understand why you said the
DISA is CUE based. For me wh...
Public Statistics
| Date Registered | 12-23-2010 12:47 AM |
| Date Last Visited | 02-20-2019 02:06 AM |
| Total Messages Posted | 20 |
