Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,i want to update a 6513, where an IOS Package "Enterprise LAN Only(s72033-ps-mz.122-18.SXD3.bin)" works. Which is the appropriate package? Enterprise Base?
I want to start the asdm-launcher from the windows command-line with a specific asa ip-address (script). So i must only insert the username and password and not the ip-adress .Is this possible? Thx for your positive answer Andreas
Hello,i don't know how i can change the port from SFP to RJ45. I see in CCO the syntax SELECT MEDIA, but in the interface-config-mode i can't use this command.
Hello,i want to control the Error-Counter( gmt(2).mib-2(1).interfaces(2).ifTable(2).ifEntry(1).ifInErrors(14)) from Catalyst 6509 and Catalyst 4506 in the NMS. But when i clear the counter in the CLI,the mib variable doesn't reset?Why? What can i do?...
Thank you for your answer, but this not my problem. I don't want make any mistake in the sight of licensing. In my first message i pasted an image from LAN ONLY Feature.The orginal image was "c6sup22-js-mz.121-13.E3.bin" installed on SUP2/MSFC2. Now...
I have an identical problem.We have a cluster firewall with 2 links to a catalyst 3524/2950. The packets to the Cluster is send to a virtual mac-adress which is never learned by the switch, because the outgoing traffic uses the physical mac-address o...
When you ping a PC and there is no valid arp entry in the arp-table of the L3-Switch,the Switch initiate an ARP-Request to the network and waiting for response form the PC. Until there is no answer the ARP-Entry for the ip-address is shown as INCOMPL...
Hi,it is a good design to keep the broadcast domain small,because every PC must execute a broadcast and this can reduce the performance.When you use vlans you need L3 components (Switch or Router) to transmit packets between the vlans and (!)ip-subne...
