Is there a Cisco Representational State Transfer (REST) API guide for PI 1.2 anywhere?I have been unable to find such a document. The closest thing I found was:prime_performance_manager_rest_api_guide.pdfHelpful, but not adequate.Thanks
I am attempting to provide very basic authorization via Steel Belted RADIUS for a Nexus deployment. Here is the code from the Nexus:radius-server host [server] key [key]radius-server host [server] key [key]ip radius source-interface mgmt0aaa group ...
Hey Steve,From the vPC design configuration guide:vPC orphan ports suspend feature was developed for single-attached devices to vPC domain and optionally working in active/standby mode (firewall or load-balancer for instance). When a vPC peer-link go...
Hello Nusrat,I appreciate the pointer. If I was using TACACS for AAA, authorization sets would be a consideration. However, authorization is not permitted when using RADIUS for AAA on the Nexus platform.In any case I was able to resolve the issue w...
Hey Mohamed,If you want to use the shorthand for write mem aka wr you can use the following command in configuration mode:cli alias name wr copy run startThis will allow you to copy the running config to the startup config with the familiar wr syntax...
Hey Nashwj,What version of NX-OS are you running?Are the 7K in a stand alone environment (lab or similar) or connected to other production network devices?Are both of the VLANs carried across the vPC peer link port-channel?Are both of the VLANs carri...
Hey Geert,Both Nexus 5020 do not need to be running the same version. However, there are limitations in terms of how different your versions may be. Generally speaking if you are upgrading within the same train (4.1.3.N2.1 to 4.1.3.N2.1a for exampl...
