Hi Everyone,
I have one WLC5508 controller and 235 AP's to upgrade.
i'm upgrading from 8.2.151.0 to 8.2.170.0 version
1. I have upload the new image to WLC.
2. then i predownload all images to all AP's, it takes all day long
3. everything ready, and ...
Hi there,i would like to know if it's possible to turn this Access Point (AIR-LAP1141N-E-K9) to standalone mode.If it is possible, how can i do it?Thanks very much,(Pls someones answer as soon as possible, because it's to implement on a client)Rgds.
Hello,Can any one look at my configuration and tell me what is missing. - I can ping between the two sites- I connect to web server from VPN server to VPN client.- I do not connect to web server from VPN client to VPN server.*** Client easy vpn confi...
Can you send me an example of configuration with Easy VPN server + Access internet.I already tried every think an no results.My solution as central site with 2611xm+aim-vpn release 12.2(15)ZJ3 C2600-IK9O3S-M .static ip from isp.12 Remote site with 83...
Hi all,I'm having this problem also on the 7937 ip conference station.I'm on CME 8.5I've searched if the new release had some solution for this issue, but i didn't find it.As you can see:http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/confi...
Solution: I recommend to add the following commands to the crypto map related with that connection: crypto ipsec df-bit clear Then go to the router interace where the crypto map is applied and put this: ip mtu 1440 ip tcp adjust-mss 1440 A tried and ...
Solution:I recommend to add the following commands to the crypto map related with that connection:crypto ipsec df-bit clearThen go to the router interace where the crypto map is applied and put this:ip mtu 1440ip tcp adjust-mss 1440Carlos
Hello , Well the ping it works but port 80 and other does not. Pease can you help me looking to my configurations and advised*** Client easy vpn config ***hostname yourname!logging queue-limit 100logging buffered 51200 warnings!username sdm privilege...
