Hi All,This is probably pretty far fetched but in an effort to centralizing and controlling access to network devices I have the desire to inject user attributes into ACS 5.2 command sets. For instance, to allow a user to manage their own vlan and s...
Hi All, I was thinking of reconfiging my network to help alleviate stp/broadcast packets across the WAN. Currently we use VTP and 802.1x to assign vlans. Each site has several vlans and people can login to their "home" vlan from anywhere on the ...
Hi All, I am attempting to use PEAP with a LDAP backend on FreeRadius witht he MS Supplicant. I have it all working, in debug on the Radius server I see it sending all the information, the tunnel, medium etc. but with PEAP the Cisco switch is not...
Hi All I am configuring a Wireless Bridge which seems a little more difficult then it should be on the Cisco stuff. I ended up going through a config guide from Cisco and got it up and running. The only disturbing thing is that the guide only spe...
Hi All, I have been trying to get CER to backup to a vsftp Linux server and have had no luck. Callmanager 6.1 logs in and back up fine be CER alsways fails at login. Contacting TAC they told me to use freeftpd, which works, but I want the sftp to...
Hi Edison, I believe I do have it right. Basically I want all the vlans to propogate except for a few at each site. So for instance "employee" vlan 135 may have a route interface at SiteA with an address of 192.168.1.1, SiteB will have one with ...
Just updating like I mentioned in the previous post, the setting I changed was the "use_tunneled_reply = yes". This fixed the issue mentioned above.Thanks
Found the problem. After I had TAC on the line and they were doing the debug I noticed the reply of some of the info looked like ciphertext so I enabled the tunneling of the replies on the FreeRadius server and that did it. That was under peap conf...
Thought I mentioned the client in the first post, I am using the 3 different types of clients with a goal of getting the MS client to work. I am using the Juniper Odyssey client, Cisco CSSC client and the MS built-in client. I mentioned the EAP-MSC...
It is the second incident, the Radius server is reporting everything as ok but the switch is not changing vlans. The weird thing is that the switch changes vlans when using EAP-MSChapV2 but not PEAP. So Eap works with the same switch, supplicant an...