About yakimus.voks

yakimus.voks · 06-23-2011

Why cannot I issue a secondary ip on VLAN interface?swzg3_11#sh run int vlan 5!interface VLAN5 ip address 10.7.1.53 255.255.255.0 no ip directed-broadcast no ip route-cacheendswzg3_11#conf tswzg3_11(config)#int vlan 5swzg3_11(config-subif)#ip add 10....

yakimus.voks · 06-01-2011

Hi everyone!Got an issue on two cisco's C3560G with different versions of IOS. When enable ipv6 and reboot, the CPU usage rises up to 92-100%One has flash:c3560-ipservicesk9-mz.122-50.SE3.bin the other has flash:/c3560-ipservices-mz.122-37.SE1.binBot...

yakimus.voks · 06-25-2011

That's really weirdI got a 3COM 3900 - also an ancient layer2 only switch - but it allows to create several interfaces in different vlans and/or several ip-s in one vlan. Cant believe that cisco does not allow same features on the same epoch of swit...

yakimus.voks · 06-23-2011

swzg3_11#sh ip int vlan 5VLAN5 is up, line protocol is up Internet address is 10.7.1.53/24 Broadcast address is 255.255.255.255 Address determined by non-volatile memory MTU is 1500 bytes Helper address is not set Directed broadcast forwarding ...

yakimus.voks · 06-03-2011

so, i guess no answer for my issue? Only I tried to have ipv6 working at C3560G?

Member Since	‎06-01-2011 01:05 PM
Date Last Visited	‎08-18-2017 03:55 AM
Posts	5

User Statistics

User Activity

3548 secondary ip on VLAN interface?

High CPU utilization after enabling ipv6

3548 secondary ip on VLAN interface?

3548 secondary ip on VLAN interface?

Re: High CPU utilization after enabling ipv6