Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
hiI got 2 used C9130AXI devices. I'm trying to configure them for my lab, using Embedded Wireless Controller.I was able to setup the EWC on one of the devices (host name Cisco-AP-2-CTRL), including the Day-0 configuration. Cisco-AP-2-CTRL>show versio...
Had the same issue - EWC with SSH and Ping working properly, but web ui not accessible.the solution in my case was re-enabling the http server (probably it got disabled by one of the "fix it" by "Best Practice recommendations".from the SSH enable the...
it seems to work now , i did 2 changes:on the EWC i noticed that the internal AP and the EWC shared the same IP (which is logical) but on my router (Netgear) it seems like a conflict. Since i had 1 IP with 2 different MAC address.So, i edited the "i...
thanks again @Flavio Miranda . i don't need HA for now, maybe later I still have problems with the versions. I setup TFTP as you mention (also tried SFTP and even cisco online cco...), yet AP doesn't it connect...I wonder why the internal AP which h...
thanks @Flavio Miranda ----- Cisco-AP-2-CTRL#wireless ewc-ap ap shell username admin
The authenticity of host '192.168.129.1 (192.168.129.1)' can't be established.
ECDSA key fingerprint is SHA256:P..............................Q.
Are you sure you wan...
the console/terminal logs on the 2nd device shows it's running infinite Discovery loop every few minutes.from that log i see 2 possible problems:Version does not match. (AP image version 17.3.3.26 backup 8.10.130.0, Controller 17.3.8.21) Going to res...
