Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have two ACS4.2(Windows image on Win2k) in my environment. Some regions are configured as a primary for ACS1 and some on ACS2. All devices are configured in both ACS. When ACS1 goes down, it didn't failover to secondary ACS server. All AAA c...
Hi All,Today i am facing issue with mobility group. i checked and found control and data path is down on foreign controller.I am able to ping anchor controller. Required ports are open on firewall but mping and eping fails. Any idea whats wrong. On ...
Dear Friends.I need to use cisco 3750E switch on core. I want to know whether BGP is supported on this model or not?Currently i have c3750e-universalk9-mz.150-2.SE/c3750e-universalk9-mz.150-2.SE.bin" preinstalled. and i checked BGP is not supported o...
Hi Friends,Is it possible to define 4 or many default network.ip route 0.0.0.0 0.0.0.0 x.x.x.xip route 0.0.0.0 0.0.0.0 y.y.y.yip route 0.0.0.0 0.0.0.0 z.z.z.zip route 0.0.0.0 0.0.0.0 a.a.a.a,where x.x.x.x and a.a.a.a are in same vlanand y.y.y.y and z...
Hi James,All AAA clinets are Cisco device. Below is the sample configuration on AAA client.-------------------------------------aaa authentication login default local group tacacs+aaa authentication login eap_methods group rad_eapaaa authentication l...
Issue is resolved after rebooting Anchor controller. Now all foreign controller is up and working fine for Guest network. Can you please help me to find the reason?
