Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
According to CSCvd94005(provide vsa extensions for acct-stats and merge for parameterized qos) the ability to set accts-stats and merge for service defined and downloaded in radius was added in some IOS-XR releases.
However, there are no infor...
Hello!How i can determine a reason of output drops?>sh inter tenGigE 0/0/0/6 Fri Nov 2 15:26:05.358 MSKTenGigE0/0/0/6 is up, line protocol is up Interface state transitions: 11 Hardware is TenGigE, address is 108c.cf1d.f326 (bia 108...
Hi Sylvia,BDI statistics is not supported on the RSP3 module.https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/cether/configuration/xe-3s/asr903/16-9-1/b-ce-xe-16-9-asr900/b-ce-xe-16-9-asr900_chapter_01011.html UPD: Starting Cisco IOS XE Fuji Release...
Hi Aleksandar,
I received an update from Cisco TAC, there is the "merge 50 acct-stats" should be added to service-configuration on Radius side, for example:
Internet_service Cleartext-Password := "cisco" Cisco-AVPair = "subscriber:sub-qos-policy-in=...
You doesn't need an MPLS on PWHE-interface. You should only configure PWHE as an interface for xconnect(p2p) at ASR9000 to ASR1001.For example,l2vpn xconnect group TEST p2p TEST interface PW-EtherXXX neighbor ipv4 X.X.X.X pw-id XXXAlso, applicat...
Hi,
The vBNG support was added in IOS-XR 6.3.1(vBNG PPPoE in 6.4.1).
https://www.cisco.com/c/en/us/td/docs/routers/virtual-routers/configuration/guide/b-xrv9k-cg/b-xrvirtual9k-cg_preface_00.html
Hi Xander,
According to "ASR9K BNG RADIUS and COA deployment guide" "trigger a service authorization ( sending access request with username of <service- name> to download a service-proFile from radius server) is not supported as of now (5.1.1 release...
