Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Trying to upgrade a c6k sup720 to IOS s72033-advipservicesk9_wan-mz.122-18.SXF9.binAfter et upgrade the switch keep hanging at:Autoboot executing command: "boot disk0:s72033-advipservicesk9_wan-mz.122-18.SXF9.bin"Loading image, please wait ...I'm abl...
I try to upgrade a WS-SVC-WISM-1-K9 from 3.2.116.21 to 4.0.155.0 (SWISMK9-4-0-155-0.aes)which fail with this error:Tue Jun 13 14:36:41 2006: tftp rc=0, pHost=1.2.3.4 pFilename=wifi/SWISMK9-4-0-155-0.aes pLocalFilename=/mnt/download/local.tgzTue J...
running c3550-ipbasek9-mz.122-25.SEB1On one of the interfaces I got a lot of these messages:PORT_SECURITY-2-PSECURE_VIOLATION: Security violation occurred, caused by MAC address 0020.e0be.d5f3 on port FastEthernet0/12The mac adress differ from messag...
FYI:I did an upgrade of ROMMON (both RP and RP), and now the switch are able to boot from disk0:s72033-advipservicesk9_wan-mz.122-18.SXF9.binThe c6k is brand new, and it's BAD that Cisco shipped this box with OLD ROMMON software.regards,Borge BrunesU...
Hi sshant,The switch is booting correct from the "fabricimage" s72033-psv-mz.122-17d.SXB11a.binI can't get the requested info in rommon state because right now I'm workin from home, but here's the info from the box right now:Router#dir sup-bootflash:...
I'm already running with"switchport port-security violation restrict"It's not working ether.Acording to info on the bug-descr. link"All affected versions. There is no 12.2-version on the list. Does this been that the bug is not present on the 12.2-tr...
