cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
715
Views
0
Helpful
1
Replies

wism upgrade failure

bbrunes
Frequent Visitor
Frequent Visitor

I try to upgrade a WS-SVC-WISM-1-K9 from 3.2.116.21 to 4.0.155.0 (SWISMK9-4-0-155-0.aes)

which fail with this error:

Tue Jun 13 14:36:41 2006: tftp rc=0, pHost=1.2.3.4 pFilename=wifi/SWISMK9-4-0-155-0.aes

pLocalFilename=/mnt/download/local.tgz

Tue Jun 13 14:36:41 2006: tftp = 6, file_name=wifi/SWISMK9-4-0-155-0.aes, ip_address=1.2.3.4, msg=Unknown error - refer to log

Tue Jun 13 14:36:41 2006: upd_get_code_via_tftp = 6 (target=268435457 msg=Unknown error - refer to log)

Tue Jun 13 14:36:41 2006: RESULT_STRING: TFTP receive complete... extracting components.

Tue Jun 13 14:36:41 2006: RESULT_CODE:6

TFTP receive complete... extracting components.

Tue Jun 13 14:36:43 2006: Still waiting! Status = 2

Tue Jun 13 14:36:45 2006: RESULT_STRING: TFTP Failure while storing in flash!

The msglog:

(WiSM-slot7-1) >show msglog

Message Log Severity Level ...................... VERBOSE

Tue Jun 13 14:36:45 2006 [ERROR] installpkg.c 1036: Footer offset (27722300) past end of file (4538368 bytes)

Is there a solution for this?

1 Reply 1

irisrios
Level 11
Level 11

Could you try loading the image once again.Check if the image is corrupted ,if so try downloading a new image.Check the ip address of the TFTP server also.

Review Cisco Networking for a $25 gift card