My supplier has configured a router to NAT connections using the interface IP of the router connected to the ISP. As this is just a router not running in Firewall mode he has created a statement on the access list applied to this interface to allow ...
HiIf I have two MDS switches one with Active Zoneset Zoneset1 and the second with Active Zoneset Zoneset2, both having different zones and members, when I merge the two what will the Active Zoneset be?ThanksSteve
On the 48 port 8Gbps line card the bandwidth that can be guaranteed is 192Gbps across the card. This means that every port can be guaranteed 4Gbps with no oversubscription. 48 x 4 =192The confusion happens when you look at port groups. This card ha...
Hi we have purchased 2 9506 Directors whic we want to dd to ir existing fabric which consists of 2 MDS 9222i switches. As the new switches are running 5.0.1 code and the MDS 4.1 (3a) I presume that I will need to upgrade the existing switches as well...
Kris,Look at this http://www.cisco.com/en/US/prod/collateral/modules/ps5991/ps9877/at_a_glance_c45-492744.pdfIt states that the 48 port 8Gb line card has 192Gbps of full duplex bandwidth. The show port resources shows the foolowing:Module 1 Availa...
I tried this and I get back this error message in the logs ASA-5-305013 Asymmetric NAT rules matched for forward and reverse flows; Connection for tcp src Outside:94.14.239.49/11199 dst SF1-Interface:109.74.241.215/80 denied due to NAT reverse path ...
