Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm looking to deploy a script to over a 1,000 routers that can continually ping a range of IP addresses. I would like to do this on the routers as opposed to a central management platform and from what research I've performed, it looks like I can do...
I'm looking for a workaround using EIGRP passive interfaces in an HSRP configuration on routers or L3 core switches in order to be able to have a downstream switch with only one management SVI receive a default route and be able to advertise any loop...
Is it possible to utilize any dynamic IPS | IDS functionality of SourceFire for known malicious IPs and geo-blocking of rogue nation states without the purchase of a dedicated IPS | IDS system.
Can I, for example, utilize Brightcloud | Talos to fil...
I'm looking for config validation and any improvements or recommendations for the following scenario:
2x Internet Routers running HSRP each are connected to a different provider, receiving default routes.
One will be the primary active and the ot...
Would someone be able to tell me if the OEAP 1810W or comparable models support wireless bridged uplink instead of plugging in for Internet access? Or do they have to operate with a copper uplink to provide network access?
Tom
Richard, I have recently run into an issue with EIGRP is distributing interface addresses as opposed to the VIP on an SVI setup with HSRP. The HSRP SVI is trunked, along with many other VLANs on a VPC to a distribution switch. From there, we have r...
This is how the other interfaces were configured: interface Vlan327ip address 10.3.27.2/24ip router eigrp 1ip passive-interface eigrp 1hsrp 0preemptpriority 255ip 10.3.27.1 interface Vlan327ip address 10.3.27.3/24ip router eigrp 1ip passive-interface...
Thanks.
What if, now, the client decided that they want to upgrade the ISRs with more RAM to accept full Internet routing tables and be able to take the best path and use PBR to prefer certain providers for certain traffic?
Tom
Thanks.But I can do OEAP? And have it act as a Remote Access Point for branch offices?And put a WLC on a public IP and have tunnel all from remote workers?Tom
