Buy or Renew
Buy or Renew
Danny To
Level 1
Level 1
Member since ‎01-19-2006
‎08-18-2017
Recent Badges
Awards

User Statistics

  • 17 Posts
  • 0 Solutions
  • 0 Helpful votes Given
  • 0 Helpful votes Received

User Activity

Default route received from Route Reflector did not get installed in BGP routing table????

10-07-2015
This issue is involved a route reflector (ASR1001x running "universalk9.03.12.00a.S.154-2.s0a-std.SPA.b" code and its 2 RR client PE1 and PE2 (both ASR9010 running IOS XR 5.3.1 with all the necessary SMUs)PE1 received default route through eBGP, adve...

Help to identify a small part that comes with the OTU2-XP card

03-18-2011
As the subject line described, I am puzzled at a part that comes with the OTU2 box. It is small, rectangular, white, plastic like but sealed in an ESD bag, tugged in the OTU2 module cage.  It looks like fiber management clip of some sort.If anyone kn...

Remove bgp network statement did not remove the corresponding bgp adverstised routes

03-08-2011
I had BGP to advertise routes using BGP network statements, with masks and static routes to null0.The routes were learned from its adjacent OSPF neighbor.All was good and I could see these routes in bgp RIB as expected.Now I wanted to remove the netw...

ONS15454 setting the trace mode failed, termination mode is transparent

06-23-2009
The full msg was:"The configuration is invalid. Setting the trace mode failed: Please check for the following incompatible conditions: 1) The termination mode is transparentThis is when I tried to set the trunk port into either facility or terminal...

OTUk:IAE and ODUk:OCI msg on ONS15454 MSTP after building OCHNC ccts

06-23-2009
Got these same error msgs after creating 3 OCHNC circuits between 3 Roadm nodes with 6 new 10E-L1-C transponder cards.As per the ONS15454 Troubleshoot Guide, the single-mode fiber patch cord connectors between the trunk port of the TXP cards and the ...
Community Statistics
Member Since ‎01-19-2006 12:56 PM
Date Last Visited ‎08-18-2017 03:55 AM
Posts 17