Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All,I have the following issue, and it would be great if you could provide some ideas on this. we have voice handsets and currently connecting to 3rd party switch --->checkpoint fw --- connecting to LAN switch (sw2 Trusted network).Recently we are...
Hi all,we have deployed voice solution across the estate using dynamic vlan via Cisco ISE. All the switches configured with vlan 5 as the default vlan and voice vlan will be vlan 488 ,deployed via cisco ISE using dynamic vlan.My question is , if both...
Hi ,We have multiple objects part of an Object-group in Cisco ASA, and wonder if there is any command that we can run to get all the IP addresses in that object-group instead of running sh run object id object-name for each object separately?please ...
Hi all,we have planning to deploy Wired voice handset solution using Dynamic vlan via Cisco ISE.Currently we have vlan 10 as the default vlan and Dynamic vlan for new voice handsets are set for vlan 495.Now my question is , in case Cisco ISE goes dow...
Hi ,We are using a 1100 Cisco router, which has been onboarded to SD-WAN. We are currently in the process of replacing the router due to a fault.Could you advise the best process to execute this task?I think the steps below may work properly1. Detac...
@Himanshu Varma I used to add "likes" for important replies and useful posts, but it seems that feature has been taken away. Could you please look into this and resolve it?Chaminda
@Arne Bier if a phone connects to back of a pc ,switchport can configure as access session host-mode multi domain as per belowhttps://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_8021x/configuration/xe-3se/3850/sec-user-8021x-xe-3se-3850-book/s...
@egregre Thanks for the reply. My question was: let's say both ISE nodes go offline. ISE will no longer be able to enforce the dynamic VLAN, hence it will fail back to the configured access VLAN on the physical port. (If so, will that receive a new D...