Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello Experts, Hello Team,Currently, we have two cloud environments (AWS and GCP) connected to our COLO endpoint devices through two transit hubs, with ECMP enabled across the paths.Existing DesignThe network is presently operating in an Active/Activ...
Hi All,
Currently trying to decrypt what is the reason behind Tags and what tag depicts in the
show ip ospf database[
Type-5 AS External Link States
Link ID ADV Router Age Seq# Checksum Tag
172.16.0.113 ...
BGP is configured across the WAN and iBGP between internal routers. There is no Layer 2 redundancy mechanism (for example, HSRP) configured between the Nexus vPC peers.The topology is as follows:Cloud ↔ eBGP ↔ Transit Hub 1 / Transit Hub 2Transit Hub...
can you run "hw-module location bay port port-mode "-commands to configure the speed and number of active ports Check the current configuration using. "show running-config hw-module location", configure the ports and reload "hw-module location <slot>...
Tryshow system resourcesshow processes memory command displays the memory allocation per process.more info you can find in following link: https://www.cisco.com/c/en/us/td/docs/dcn/nx-os/nexus9000/103x/troubleshooting/cisco-nexus-9000-series-nx-os-t...
